LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Pet Supplies Aquarium Supplies Aquarium and pond pumps Submersible Water Pump JN-4000 80 W with a capacity of 4000 l/h and a lift of 4 m with three outlet diameters in black for pond waterfalls
Submersible Water Pump JN-4000 80 W with a capacity of 4000 l/h and a lift of 4 m with three outlet diameters in black for pond waterfalls

Submersible Water Pump JN-4000 80 W with a capacity of 4000 l/h and a lift of 4 m with three outlet diameters in black for pond waterfalls

Four thousand litres per hour and a lift of 4 m will move water even to the next floor. The inlet accepts hoses of 13, 16 or 19 mm depending on what is available. Full description
In stock
€128.78
Safe shopping Safe shopping
Overview
Submersible Water Pump JN-4000 80 W with a capacity of 4000 l/h and a lift of 4 m with three outlet diameters in black for pond waterfalls

A waterfall cascading from a height or a pond with a volume of several cubic metres places the highest demands on the pump across a range of factors. This submersible pump with a power consumption of 80 W can move up to 4000 litres of water per hour, which is approximately 67 litres of water per minute. The maximum lift of 4 m means that water can rise even to the upper level of a multi-tiered garden cascade. The body measures 138 x 87 x 103 mm, is entirely black, and the front is covered with a grooved suction grid across the entire surface. The outlet is designed for three hose diameters and is powered by a standard network of 220 to 240 V at 50 to 60 Hz.

Key Features:

  • Flow rate up to 4000 l/h — high water volume for large ponds and for cascades with filters
  • Power consumption 80 W — consumption corresponding to high flow rates and a lift of up to 4 m
  • Maximum lift 4 m — water reaches the upper tier of the waterfall
  • Outlet 13, 16 and 19 mm — three diameters for thinner or thicker pond hoses or pipes
  • Dimensions 138 x 87 x 103 mm — same format as the weaker variant in this range
  • Power supply 220 to 240 V — operates directly from the socket without a converter or additional adapter
  • Frequency 50 to 60 Hz — the pump runs on the European power grid without restrictions
  • EU plug — the power cable ends with a plug for a standard European socket
  • Suction cups on feet — the pump attaches to the bottom and holds its position even while running
  • Four feet — the device stands level on the bottom of the tank or pond
  • Grooved suction grid — suction occurs across the entire front surface of the pump body
  • Vertical outlet on top — the outlet directs straight upwards from the top surface of the body
  • Submersible design — the pump operates entirely below the surface in the pond or tank
  • Waterfall drive — constant flow to the upper tier of the garden cascade
  • Filtration of large pond — water passes through an external filter and returns
  • Black design — dark casing and dark suction cover on the front

Contents of the package:

  • 1x submersible pump

The model targets ponds where it is necessary to maintain a high water volume and required height simultaneously. A lift of 4 m is the main difference compared to weaker models, as it opens the way to higher cascades. The flow rate of 4000 l/h can also manage a filtration column connected to the same water circuit. Three outlet diameters allow the selection of a hose based on the length of the run without additional connectors or reducers. Once submerged in water and plugged into the socket, the pump operates without further settings.

Price incl. VAT €128.78