Home page Home page Home & Household Supplies Kitchen Kitchen Accessories Kitchen Racks & Holders Stainless Steel Stand for Chopping Boards and Lids 2 pcs 12.5 x 9.7 x 9.6 cm Compact Holder with Three Arches Silver for Kitchen Worktop
Stainless Steel Stand for Chopping Boards and Lids 2 pcs 12.5 x 9.7 x 9.6 cm Compact Holder with Three Arches Silver for Kitchen Worktop

Stainless Steel Stand for Chopping Boards and Lids 2 pcs 12.5 x 9.7 x 9.6 cm Compact Holder with Three Arches Silver for Kitchen Worktop

A pair of stainless steel stands with two compartments keeps chopping boards and lids upright on the worktop or in a cupboard, saving space in the kitchen while cooking. Full description
In stock
€19.17
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Stainless Steel Stand for Chopping Boards and Lids 2 pcs 12.5 x 9.7 x 9.6 cm Compact Holder with Three Arches Silver for Kitchen Worktop

The stainless steel stand for chopping boards and lids is a compact kitchen organiser that keeps chopping boards and lids upright and in one place. The pack contains two separate stands, so you can keep one on the worktop next to the hob and put the other away in a cupboard or on a shelf by the sink. The entire structure is made of stainless steel, which does not bend out of shape, does not rust from running water and is easy to wipe clean. Each stand measures 12.5 x 9.7 x 9.6 cm, so it takes up only a small amount of worktop space and also fits on a narrower shelf. Three vertical arches create two compartments between them, into which you simply slide a chopping board or lid from above.

Upright storage has several advantages in the kitchen. A wet chopping board dries more quickly after washing because the water runs down and air can circulate around it, while lids do not roll around on the worktop or take up space in a drawer. The compartments are 3 cm and 2 cm wide, so they can hold a thin plastic chopping board, a thicker wooden chopping board or a lid with a handle in the centre. The lower frame, made from bent wire, forms a stable base that rests on the surface around its entire perimeter and keeps even a taller chopping board upright without tipping over. The smooth edges and rounded joints will not scratch the worktop or the stored kitchenware.

  • Material – stainless steel
  • Dimensions of one stand – 12.5 x 9.7 x 9.6 cm
  • Compartment widths – 3 cm and 2 cm
  • Width of top section – 6.7 cm
  • Colour – silver
  • Construction – three arches and a lower support frame
  • Placement – kitchen worktop, shelf or inside a cupboard
  • Suitable for – chopping boards and saucepan and frying pan lids
  • Care – wipe with a damp cloth and dry
  • Pack contents – 2 stands for chopping boards and lids

Simply place the stand on a flat surface and insert the chopping boards with their bottom edges facing downwards; put the heavier item in the wider compartment and the lighter one in the narrower compartment. It is also useful in the cupboard under the sink or on a pantry shelf, where it keeps chopping boards upright and prevents them from sliding down. As it is uncoated metal, clean it by wiping with a damp cloth and a drop of washing-up liquid, then dry it to prevent water marks from remaining on the wires. Do not place hot lids straight from the hob on the stand; allow them to cool first.

A set of two stands helps keep the kitchen tidy where chopping boards and lids would otherwise pile up or be squeezed into a drawer. Thanks to their compact dimensions, they fit on the worktop or in a cupboard while keeping two pieces of kitchen equipment close at hand when cooking. Two pieces in the pack make it possible to divide storage between the work surface and a closed cupboard, depending on how you work in the kitchen. The stainless steel finish complements the sink, hob and other metal accessories, and stays looking the same even after years of use.

Price incl. VAT €19.17