Home page Home page Hobbies & Garden Tools Soldering Irons & Accessories Sound-Controlled Running Light Kit with CD4017 Circuit Eleven LEDs and Microphone Power Supply 4–12 V Soldering Kit
Sound-Controlled Running Light Kit with CD4017 Circuit Eleven LEDs and Microphone Power Supply 4–12 V Soldering Kit

Sound-Controlled Running Light Kit with CD4017 Circuit Eleven LEDs and Microphone Power Supply 4–12 V Soldering Kit

Soldering kit with a series of LEDs that move according to sound. CD4017 counter, 9014 transistor, and microphone on an elongated board with a power supply of 4–12 V. Full description
In stock
€4.32
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Sound-Controlled Running Light Kit with CD4017 Circuit Eleven LEDs and Microphone Power Supply 4–12 V Soldering Kit

The sound-controlled running light kit is a soldering kit in which the light gradually moves along a series of LEDs in response to sound. The heart of the circuit is the CD4017 counter, which sequentially switches its outputs and lights up individual LEDs. Sound is detected by an electret microphone, and the signal is amplified by a 9014 transistor, so each clap or louder sound moves the light one step further. The board features a total of 11 LEDs in clear casings, ten of which form a continuous line along the top edge. The kit is supplied as loose components for soldering and is suitable for hobbyists, students, and electronics clubs.

The elongated printed circuit board has marked positions for all components including resistors R1 to R5, capacitors, and the transistor, making it easy to orientate during assembly. Power is connected via a two-pin connector, and according to the printing on the board, the circuit is designed for 4–12 V voltage. The wide power supply range allows for the use of a standard mains adapter or batteries. The integrated circuit CD4017 in a DIP16 package is soldered directly onto the board, so it is advisable to work carefully and avoid overheating its pins. The layout of the components is clear and provides a good practice for soldering leaded components.

  • Type – sound-controlled running light kit for soldering
  • Control Circuit – CD4017 counter
  • Sensor – electret microphone with 9014 transistor
  • Light Effect – 11 LEDs in clear casings
  • Power Supply – 4–12 V via two-pin connector
  • Execution – loose components for soldering and assembly
  • Purpose – electronics education and soldering training
  • Package Contents – printed circuit board and component kit (CD4017 circuit, 11 LEDs, electret microphone, 9014 transistor, electrolytic capacitors, resistors, power connector)

When assembling, start with the resistors, continue with the integrated circuit, transistor, capacitors, and microphone, and finally solder the LEDs so that they stand in a straight line. Pay attention to the orientation of the CD4017 circuit according to the cutout on the package, the polarity of the electrolytic capacitors, and the LEDs. After completion, check all connections, remove any flux residues and solder bridges between nearby pins. Then connect the power supply and test how the light reacts to clapping or music.

The sound-controlled running light kit is an interesting project that connects a sound sensor with a digital counter. On the completed board, you will clearly see how the 9014 transistor amplifies the signal from the microphone and how the counter sequentially switches the LEDs. The series of lights reacting to music serves as an impressive decoration as well as a demonstration for school or electronics club. You can further explore and modify the circuit with the electret microphone in your own configurations. The kit is suitable for beginners as well as moderately advanced hobbyists. It is a practical way to combine soldering practice with an understanding of counter principles.

Price incl. VAT €4.32