Home page Home page Hobbies & Garden Tools Soldering Irons & Accessories Sound-Controlled LED Light Kit for Soldering with Five LEDs, Electret Microphone and Two 9014 Transistors, Power Supply 3–5 V
Sound-Controlled LED Light Kit for Soldering with Five LEDs, Electret Microphone and Two 9014 Transistors, Power Supply 3–5 V

Sound-Controlled LED Light Kit for Soldering with Five LEDs, Electret Microphone and Two 9014 Transistors, Power Supply 3–5 V

Soldering kit for a light that lights up to the rhythm of sound. Five LEDs, a microphone and two 9014 transistors on a small board with a connector for a 3–5 V power supply. Full description
In stock
€4.76
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Sound-Controlled LED Light Kit for Soldering with Five LEDs, Electret Microphone and Two 9014 Transistors, Power Supply 3–5 V

The sound-controlled LED light kit is a soldering set from which you can assemble a circuit that responds to sounds in the environment. The signal is captured by an electret microphone in the centre of the board and, after amplification, lights up a series of LEDs according to the volume of music, clapping or voice. At the top edge of the board, there are five LEDs in clear casings that create a striking light effect. The circuit uses two transistors, electrolytic capacitors and resistors, making it simple and understandable. The kit is supplied as loose components for soldering and is suitable for beginners, students, and hobbyists who want to try their first project with a sound sensor.

The circuit has two stages with 9014 transistors. The first amplifies the weak signal from the microphone, and the second switches all five LEDs connected in parallel. The power supply is connected via a two-pin connector and, according to the printing on the board, is designed for 3–5 V voltage, so you can power the circuit from a USB source or a battery cell. The positions of all components are marked on the board with labels R1 to R3, C1, C2 and Q1, Q2, which makes correct assembly easier. The board is small, so the finished circuit fits well into a box or decoration.

  • Type – sound-controlled LED light kit for soldering
  • Sensor – electret microphone
  • Light Effect – 5 LEDs in clear casings connected in parallel
  • Circuit – two 9014 transistors, electrolytic capacitors and resistors
  • Power Supply – 3–5 V via two-pin connector
  • Execution – loose components for soldering and assembly
  • Purpose – teaching electronics and soldering practice
  • Contents of Package – printed circuit board and a set of components (5 LEDs, electret microphone, 2 9014 transistors, 2 electrolytic capacitors, resistors, two-pin connector)

When assembling, start with the resistors, then move on to the transistors, capacitors, connector and microphone, and finally solder the LEDs. Watch the polarity of the electrolytic capacitors, LEDs, and microphone, and install the transistors according to the outline of the casing on the print. After soldering, check the connections, remove any excess flux and possible solder bridges. Then connect the power supply and test how the LEDs respond to clapping or music. If the circuit does not respond, first check the orientation of the transistors and microphone.

The sound-controlled LED light kit is a fun project where you can practically verify how an amplifier with transistors works and how sound is converted into a light signal. The simple circuit with two transistors can be managed even by complete beginners, and the finished board serves as a small decoration that responds to music. The small number of components and low power supply voltage make the kit a safe project for school and electronics clubs. The kit is suitable for children under adult supervision, students, and hobbyists. It is a practical way to combine soldering practice with understanding the principles of sound sensors.

Price incl. VAT €4.76