Home page Home page Hobbies & Garden Tools Soldering Irons & Accessories Soldering Kit for a Music Box with CD4066 and CD4011 Circuits, Piezo Buzzer and Four Slide Switches for Beginners
Soldering Kit for a Music Box with CD4066 and CD4011 Circuits, Piezo Buzzer and Four Slide Switches for Beginners

Soldering Kit for a Music Box with CD4066 and CD4011 Circuits, Piezo Buzzer and Four Slide Switches for Beginners

Assemble your own electronic music box that plays melodies through a buzzer. The selection is set using four switches, ideal for practicing soldering. Full description
In stock
€4.76
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Soldering Kit for a Music Box with CD4066 and CD4011 Circuits, Piezo Buzzer and Four Slide Switches for Beginners

The music box kit is a soldering set from which you will assemble a small electronic circuit that plays melodies. The sound is produced by a piezo buzzer located directly on the printed circuit board, so the finished box does not require any additional speaker. The board contains two integrated circuits, the analogue switch CD4066 and the gates CD4011, which, along with the music module, ensure playback. Control is managed by four slide switches S1 to S4 at the bottom of the board. The kit is supplied as loose components, allowing you to assemble the entire circuit by hand while practicing soldering.

The printed circuit board has printed positions for all components, including the designations for resistors R1 to R9, diodes D1 to D3, and transistor Q1. The music module is inserted vertically into the right edge of the board, and the buzzer is amplified by a transistor 8050. On the left side, there is a pin header J2 with outputs A, B, C, D, and GND, through which the circuit can be connected to other experiments. There are holes in the corners of the board, allowing you to easily attach the finished box to a case or a base. The connections are clear, and there are just enough components for even a beginner to manage the assembly.

  • Type – soldering kit for an electronic music box
  • Integrated Circuits – CD4066 and CD4011
  • Sound – piezo buzzer on the board
  • Control – 4 slide switches S1 to S4
  • Amplification – transistor 8050
  • Interface – pin header with outputs A, B, C, D, and GND
  • Execution – loose components for soldering and assembly
  • Contents – printed circuit board and set of components (CD4066 and CD4011 circuits, music module, piezo buzzer, transistor 8050, 1N4148 diodes, 4 slide switches, resistors, capacitor, pin header)

When assembling, first solder the low components, namely the resistors and diodes, then the integrated circuits, transistor, capacitor, and switches, and finally the buzzer, pin header, and music module. Mount the integrated circuits according to the cutout on the package and the diodes according to the stripe. After completion, check all connections under good light, remove any excess solder and possible solder bridges between adjacent pins, and only then connect the power supply.

The soldering music box is a fun project where the result is immediately audible. On one circuit, you will try working with integrated circuits, transistors, and switches and see how a few components become a functional musical toy. The kit is suitable for beginners, students, electronics clubs, and as a gift for DIY enthusiasts who want to learn to solder. The finished circuit can be embedded in your own case, creating an original little item for your desk or child's room. Thanks to the printed board, you will easily orient yourself during assembly, and you can show your finished work to friends or classmates at any time.

Price incl. VAT €4.76