LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Garage Equipment Welding Supplies Soldering Flux 50 ml No Clean Bottle 9.5 x 3.5 cm Needle Applicator White For Soldering Circuit Boards and Batteries
Soldering Flux 50 ml No Clean Bottle 9.5 x 3.5 cm Needle Applicator White For Soldering Circuit Boards and Batteries

Soldering Flux 50 ml No Clean Bottle 9.5 x 3.5 cm Needle Applicator White For Soldering Circuit Boards and Batteries

The needle tip dispenses drops directly onto the soldered area without overflowing. After soldering, there is no need to rinse off residues, and the solder wets pads and leads better. Full description
In stock
€17.42
Safe shopping Safe shopping
Overview
Soldering Flux 50 ml No Clean Bottle 9.5 x 3.5 cm Needle Applicator White For Soldering Circuit Boards and Batteries

Liquid soldering flux improves the wettability of solder, removes oxides from soldered surfaces, and prevents the formation of cold joints. The volume of the bottle is 50 ml, which, when dispensed drop by drop, is sufficient for hundreds of joints and regular service practices for a long time. The flux is in a no clean formulation, so residues after soldering do not need to be removed with solvent, and the board can go straight back into operation. The needle applicator allows you to apply the flux precisely to one solder pad without it running onto adjacent leads. The white bottle is sealed with a cap that prevents drying out and spillage when turned over.

  • Needle Applicator — the thin tip dispenses the flux drop by drop, allowing access even between densely populated components.
  • No Rinsing Required — the no clean formulation saves time and reduces the consumption of isopropyl alcohol during servicing.
  • Use with Batteries — the flux is suitable for soldering tabs onto 18650 cells and onto stainless surfaces, where regular rosin is insufficient.
  • Precision Electronics — you will use it for repairs of mobile phones, populating circuit boards, and working with BGA packages.
  • Material Limitations — the flux is not intended for soldering aluminium, for which a special aluminium flux is required.
  • Dimensions of the Bottle — the bottle measures 9.5 x 3.5 cm, making it fit into a service bag and a tool drawer.
  • Economical Dispensing — one drop covers a standard solder pad, so consumption is low.
  • Package Contents — 1x 50 ml soldering flux bottle

The flux is used by service technicians, electronic repairers, and hobbyists who solder their own boards, connectors, and battery assemblies. It is applied before placing the tip, onto a clean and degreased surface, as solder does not adhere to grease even with flux. The bottle measuring 9.5 x 3.5 cm fits comfortably in the hand and takes up little space on the table when the tip is laid down. When working, we recommend ventilating the area, as the flux releases vapours when heated. After finishing work, close the bottle to prevent the contents from drying out.

Price incl. VAT €17.42