Home page Home page Hobbies & Garden Solar equipment Solar panels Solar Panel 5 V 200 mA 1 W 130 x 60 mm Rectangular Photovoltaic Cell Without Cable for DIY Projects Solar Models and Education
Solar Panel 5 V 200 mA 1 W 130 x 60 mm Rectangular Photovoltaic Cell Without Cable for DIY Projects Solar Models and Education

Solar Panel 5 V 200 mA 1 W 130 x 60 mm Rectangular Photovoltaic Cell Without Cable for DIY Projects Solar Models and Education

Rectangular solar cell measuring 130 x 60 mm with a voltage of 5 V and a power output of 1 W. Supplied without a cable; solder the wires on according to the needs of your own project. Full description
In stock
€10.44
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Solar Panel 5 V 200 mA 1 W 130 x 60 mm Rectangular Photovoltaic Cell Without Cable for DIY Projects Solar Models and Education

This rectangular solar panel, measuring 130 x 60 mm, is a suitable power source for DIY projects, models and simple electronic projects. In full light, it supplies a rated voltage of 5 V and a current of 200 mA. The panel is supplied without a cable, so you can connect wires at exactly the length required by your circuit. Its elongated shape is well suited to the roof of a model house, the side wall of a box or a flat stand. Use it at home, at school or in an electronics club.

The panel has a peak power output of 1 W, which is sufficient to power several LEDs, a small motor or slowly charge a small rechargeable battery via a charging module. The manufacturer measured the stated values under a simulated light intensity of 38,000 lux. In actual use, output varies according to the weather, the angle of the sun's rays and the cleanliness of the surface, so point the panel directly towards the sun and position it out of the shade.

The panel can power a solar car or boat, serve as a source for a garden light, form the basis of your own small solar charger or be used as a teaching aid for lessons about renewable energy sources. Connecting multiple panels in series increases the voltage, while connecting them in parallel increases the current. The cable-free connection gives you the freedom to choose your own wires and connector. Before permanently installing the panel, measure the voltage and current with a multimeter at the location where it will operate, as the angle and partial shade can significantly affect the results.

  • Type – rectangular solar panel
  • Rated voltage – 5 V
  • Rated current – 200 mA
  • Peak power – 1 W
  • Dimensions – 130 x 60 mm
  • Measurement conditions – simulated light intensity of 38,000 lux
  • Connection – without a cable; wires are soldered to the positive and negative contacts
  • Package contents – 1 solar panel, 130 x 60 mm, without a cable

When soldering, ensure the polarity is correct and apply the soldering iron tip to the contact only briefly to avoid overheating the cell. If you want to charge a rechargeable battery with the panel, always use a charging module designed for that type of battery. Wipe the cell surface regularly with a soft, dry cloth without cleaning products, as dust reduces its output. The cell is fragile, so do not bend it and mount it across its entire surface on a flat, solid base.

The 130 x 60 mm solar panel is a practical component for anyone building their own solar-powered device. Its 5 V voltage is compatible with a range of common circuits using diodes, motors and charging modules. The slim rectangular format also fits into spaces where a square cell would not. The cable-free connection gives you full control over how you integrate the panel into your project. It is a sensible choice for model makers, DIY enthusiasts and teachers looking for solar power with a higher current in a compact size.

Price incl. VAT €10.44