Home page Home page Hobbies & Garden Solar equipment Solar panels Solar panel 5 V 200 mA 1 W 109 x 83 mm Photovoltaic cell with contacts on the back for DIY projects models and crafts
Solar panel 5 V 200 mA 1 W 109 x 83 mm Photovoltaic cell with contacts on the back for DIY projects models and crafts

Solar panel 5 V 200 mA 1 W 109 x 83 mm Photovoltaic cell with contacts on the back for DIY projects models and crafts

109 x 83 mm solar cell with a voltage of 5 V and a current of 200 mA for home electronics. Solder the wires to the positive and negative contacts on the back. Full description
In stock
€10.87
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Solar panel 5 V 200 mA 1 W 109 x 83 mm Photovoltaic cell with contacts on the back for DIY projects models and crafts

This solar panel, measuring 109 x 83 mm, delivers power suitable for small solar-powered devices in a compact format. In full light, it provides a rated voltage of 5 V and a current of 200 mA. The panel is supplied without a cable and has positive and negative contact pads on the back, to which you can solder wires of the required length. Its almost square shape is easy to fit on a box lid, a model roof or a small holder. It is ideal for DIY projects at home, at school or in an electronics club.

The panel has a peak power of 1 W, so it can power several LEDs, a small motor or slowly recharge a small battery via a suitable charging module. The manufacturer's stated values apply at a simulated light intensity of 38,000 lux. Actual output varies depending on the weather, the angle of the sun's rays and the cleanliness of the surface, so point the panel directly towards the sun and keep it out of the shade.

You can use the panel to power a solar pinwheel or car, run a garden light, build a simple solar charger or carry out educational experiments on converting light into electricity. Connecting several units in series increases the voltage, while connecting them in parallel increases the current. The contacts on the back allow you to attach thin wires or a connector to suit your needs. Before permanent installation, check the voltage and current with a multimeter at the exact location where the panel will be fitted, as even a small amount of shade will affect the result.

  • Type – rectangular solar panel
  • Rated voltage – 5 V
  • Rated current – 200 mA
  • Peak power – 1 W
  • Dimensions – 109 x 83 mm
  • Measurement conditions – simulated light intensity of 38,000 lux
  • Connection – positive and negative contact pads on the back for soldering wires
  • Package contents – 1 solar panel, 109 x 83 mm, without a cable

When soldering, observe the correct polarity and heat the contact only briefly. Always use a charging module designed for the specific type of battery when recharging it. Clean the cell's surface with a soft, dry cloth without detergents, as dust and dirt reduce its output. The cell is fragile, so protect it from bending, drops and impacts, and attach it to a flat, firm surface.

The 109 x 83 mm solar panel is a versatile component for electronic projects that require a higher current in a compact format. Its 5 V voltage is suitable for many common circuits with diodes, motors and charging modules. Its compact size makes it easy to incorporate into models, construction kits and small devices for the home and garden. The exposed contacts give you full control over how it is connected. It is an excellent choice for anyone who needs solar power with an output of one watt for their project.

Price incl. VAT €10.87