Home page Home page Hobbies & Garden Solar equipment Solar panels Solar panel 5.5 V 300 mA 1.65 W 285.5 x 42.5 mm Long narrow photovoltaic strip with contacts on the back for models and DIY
Solar panel 5.5 V 300 mA 1.65 W 285.5 x 42.5 mm Long narrow photovoltaic strip with contacts on the back for models and DIY

Solar panel 5.5 V 300 mA 1.65 W 285.5 x 42.5 mm Long narrow photovoltaic strip with contacts on the back for models and DIY

Long solar strip measuring 285.5 x 42.5 mm with a voltage of 5.5 V and an output of 1.65 W. The contacts for soldering wires are in the centre of the back; it comes without a cable. Full description
In stock
€13.06
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Solar panel 5.5 V 300 mA 1.65 W 285.5 x 42.5 mm Long narrow photovoltaic strip with contacts on the back for models and DIY

This long, narrow solar panel measuring 285.5 x 42.5 mm is a more powerful energy source for models, lights and electronic projects where an elongated surface is available. In full light, it supplies a rated voltage of 5.5 V and a current of 300 mA. The panel is supplied without a cable and has contact pads in the centre of the back, to which you can solder wires of the required length. Its strip shape is suitable for a roof ridge, the edge of a canopy, a rail or the top edge of a box. It is ideal for hobbyists, schools and electronics clubs.

The panel has a peak output of 1.65 W, which is sufficient for several LEDs, a small motor or simple charging electronics. The manufacturer measured the stated specifications at a simulated light intensity of 38,000 lux. In actual use, output varies depending on the weather, the panel's angle and the cleanliness of its surface, so point the strip directly towards the sun and protect it from shade. Its row of separate cells running along its entire length makes it easy to recognise at a glance.

The panel can power garden lighting, a solar-powered model car or boat, or be used to build a simple charger with a charging module and for demonstrations of how light is converted into electrical energy. Connecting several units in series gives you a higher voltage, while connecting them in parallel gives you a higher current. The contacts supplied without a cable let you choose wires and a connector to suit your project exactly. Before permanent installation, check the voltage and current with a multimeter at the location where the panel will operate, as even shade on a single cell can significantly reduce the output of the entire strip.

  • Type – long, narrow strip-shaped solar panel
  • Rated voltage – 5.5 V
  • Rated current – 300 mA
  • Peak output – 1.65 W
  • Dimensions – 285.5 x 42.5 mm
  • Measurement conditions – simulated light intensity of 38,000 lux
  • Connection – contact pads in the centre of the back for soldering wires
  • Package contents – 1 solar panel measuring 285.5 x 42.5 mm, without a cable

When soldering, observe the polarity and keep the soldering iron tip on the contact for only a short time. To charge a rechargeable battery, use a charging module suitable for the specific battery type. Clean the panel surface with a soft, dry cloth. The long cell is fragile, so do not bend it; hold it at both ends when handling it and attach it along its entire length to a flat, rigid base.

The long solar strip measuring 285.5 x 42.5 mm is a practical component for models, lights and small electronic devices with higher power consumption. Its 5.5 V voltage is suitable for a range of simple circuits with diodes, motors and charging modules. Its elongated format makes use of a narrow, long surface where a square cell would not fit. The bare contacts give you complete control over the connection. It is a good choice for anyone who needs more output from a narrow panel.

Price incl. VAT €13.06