Home page Home page Hobbies & Garden Tools Grinders & Accessories Soft Hook and Loop Interface Pad 50 mm 5 pcs Foam Spacer 2 Inch 8 mm Thick Sponge and Velour For Sanding Discs Sanding and Polishing
Soft Hook and Loop Interface Pad 50 mm 5 pcs Foam Spacer 2 Inch 8 mm Thick Sponge and Velour For Sanding Discs Sanding and Polishing

Soft Hook and Loop Interface Pad 50 mm 5 pcs Foam Spacer 2 Inch 8 mm Thick Sponge and Velour For Sanding Discs Sanding and Polishing

Set of 5 50 mm foam interface pads with hook and loop fastening. Soft interface pad between the backing pad and sanding disc for fine sanding of curved and uneven surfaces. Full description
In stock
€9.56
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Soft Hook and Loop Interface Pad 50 mm 5 pcs Foam Spacer 2 Inch 8 mm Thick Sponge and Velour For Sanding Discs Sanding and Polishing

The 50 mm diameter foam interface pad with hook and loop fastening serves as a soft spacer between the backing pad and sanding disc. It allows the abrasive paper to follow curved and contoured shapes more closely, making sanding gentler on the workpiece. The pack contains 5 pcs of the same size, so you always have a replacement ready. The interface pad is designed for 2-inch backing pads used with a drill, mini sander or small polisher. It is ideal for sanding and polishing small and medium-sized surfaces.

The top of the spacer has hooks that attach to a sanding disc with a hook and loop backing. The underside is covered with velour and attaches to the hooked surface of the backing pad. Between the two layers is soft foam, which flexes, distributes pressure and allows the sanding disc to reach closer to edges. This reduces the risk of sanding through raised areas and protects the hooked surface of the backing pad from wear. Thanks to the hook and loop fastening, changing the sanding disc takes just a few seconds. The 50 mm diameter is a practical compromise between precision when working on details and speed on larger surfaces.

  • Type – foam spacer (soft interface pad) with hook and loop fastening
  • Diameter – 50 mm (2 inches)
  • Thickness – 8 mm, including a 5 mm foam layer
  • Material – sponge, hooked layer and velour
  • Top – hooks for sanding discs with hook and loop backing
  • Underside – velour for attachment to a backing pad with hook and loop fastening
  • Suitable for – sanding and polishing uneven surfaces and shaped parts
  • Pack contents – 5 foam interface pads, 50 mm

Installation is simple: place the interface pad against the backing pad with the velour side facing down, press it into place, then attach a sanding disc to the hooked side. The backing pad, spacer and sanding disc should all have the same 50 mm diameter to ensure the abrasive sits flush across the entire surface. It is advisable to clean the spacer of dust after use so that the hook and loop fastening holds securely. When the foam wears out, replace it with another piece from the set. During sanding, keep the tool steady and do not press too hard; the soft foam will then work evenly and last longer. You can attach sanding discs of different grits to the spacer, depending on whether you are sanding the surface roughly or polishing it finely.

The soft 50 mm spacer makes it easier to sand curved surfaces, edges and shaped items, such as wooden bowls. The foam layer helps achieve an even result without over-sanded areas and protects the backing pad. With hook and loop fastening on both sides, the abrasive can be changed quickly without adhesive. It is suitable for home workshops and for more frequent work with wood and other materials. The pack of 5 pcs provides a good supply of interface pads for longer-term use.

Price incl. VAT €9.56