Home page Home page Hobbies & Garden Tools Riveting Tools and Equipment Set of 4 Rivet Nut Tools M3 to M6 and 75 Rivet Nuts in a Plastic Case Carbon Steel Hand Riveting into Sheet Metal and Profiles
Set of 4 Rivet Nut Tools M3 to M6 and 75 Rivet Nuts in a Plastic Case Carbon Steel Hand Riveting into Sheet Metal and Profiles

Set of 4 Rivet Nut Tools M3 to M6 and 75 Rivet Nuts in a Plastic Case Carbon Steel Hand Riveting into Sheet Metal and Profiles

Four M3 to M6 tools and 75 nuts neatly stored in a compartmentalised case. Create a secure thread in thin sheet metal using a spanner, ratchet or drill. Full description
In stock
€21.35
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Set of 4 Rivet Nut Tools M3 to M6 and 75 Rivet Nuts in a Plastic Case Carbon Steel Hand Riveting into Sheet Metal and Profiles

This compact rivet nut setting tool set is ideal wherever you need to create a secure thread in thin material. It contains 4 tools for M3, M4, M5 and M6 threads and a supply of 75 rivet nuts in the same sizes. All the parts are stored in a compartmentalised plastic case, keeping the tools and nuts together. The tools are made of carbon steel and have a hexagonal body for fitting a spanner. The set is suitable for a small workshop, garage or use on site.

Screw a nut onto the threaded mandrel of the tool, insert it into a pre-drilled hole and tighten it by turning the upper part of the tool. The knurled shank expands in the hole, the flat flange rests against the surface and the nut is held firmly without turning. The tools can be operated with a spanner or ratchet and, according to the seller's photos, also with a cordless drill. Once the mandrel has been unscrewed, a thread is left in the sheet metal or profile, ready for a screw. Each thread size has its own tool, so when changing to another size, simply pick up the next tool and carry on working.

  • Type – set of manual rivet nut tools with rivet nuts
  • Thread sizes – M3, M4, M5 and M6
  • Tool height – M3 3.3 cm, M4 3.4 cm, M5 4 cm, M6 4.1 cm
  • Tool material – carbon steel
  • Rivet nuts – flat flange and knurled shank
  • Operation – spanner, ratchet or drill
  • Storage – compartmentalised plastic case
  • Package contents – 4 rivet nut tools M3 to M6, 75 rivet nuts (25 pcs M3, 15 pcs M4, 25 pcs M5, 10 pcs M6) and a plastic case

Use the set to fit brackets, covers, plates, trim strips and small shelves to sheet metal parts, to repair cabinets, electrical enclosures and trailers, and to modify aluminium profiles. Before riveting, drill a hole matching the outer diameter of the nut and position the nut perpendicular to the surface. The pack contains the most pieces in sizes M3 and M5, with 25 nuts each, and smaller quantities in M4 and M6. After use, clean metal swarf from the tools, lightly lubricate the mandrels occasionally and return everything to the case, where the parts will remain protected and neatly sorted by size.

This set of four rivet nut tools with a supply of nuts in a case is practical for DIY enthusiasts who occasionally need to create a thread in thin material and do not want to buy a large set. The M3 to M6 range covers light-duty and moderately loaded joints around the home, in the garage or at a holiday home. Riveting can be done by hand with a spanner or more quickly with a drill. The organised case makes it easier to select the right nut and prevents small parts from getting lost. Once the nuts have been used up, simply buy replacements in the same sizes and continue using the tools. You can also create a joint in a closed profile without access to the back.

Price incl. VAT €21.35