Home page Home page Home & Household Supplies Kitchen Cooking Kitchen Knives & Scissors Knife Sharpeners & Steels Set of 4 Diamond Sharpening Stones 80 150 240 and 400 Grit 160 x 20 x 9 mm Coarse Knife Sharpening Stones for Ruixin Pro Sharpener Edge Repair
Set of 4 Diamond Sharpening Stones 80 150 240 and 400 Grit 160 x 20 x 9 mm Coarse Knife Sharpening Stones for Ruixin Pro Sharpener Edge Repair

Set of 4 Diamond Sharpening Stones 80 150 240 and 400 Grit 160 x 20 x 9 mm Coarse Knife Sharpening Stones for Ruixin Pro Sharpener Edge Repair

Four coarse diamond stones in 80, 150, 240 and 400 grit for repairing notches and shaping a new knife edge. For the Ruixin Pro sharpener or manual sharpening. Full description
In stock
€23.10
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Set of 4 Diamond Sharpening Stones 80 150 240 and 400 Grit 160 x 20 x 9 mm Coarse Knife Sharpening Stones for Ruixin Pro Sharpener Edge Repair

A set of four diamond sharpening stones with grits of 80, 150, 240 and 400 grit, designed for coarse sharpening and repairing a severely damaged edge. They are suitable for knives with chipped or rounded edges, deep nicks or where the sharpening angle needs to be changed. Each stone has a diamond coating on its surface, which removes steel quickly and effectively. All four stones measure 160 x 20 x 9 mm and are designed for the Ruixin Pro sharpening system. After using this set, it is advisable to refine the edge with finer stones.

The coarsest 80-grit stone removes nicks and quickly shapes a new edge. The 150-grit stone continues shaping, while the 240-grit stone reduces the deep scratches left by the previous stages. The 400-grit stone evens out the edge and prepares it for medium and fine stones. The diamond surface of each stone is fixed to a sturdy backing that keeps the stone flat and makes it easier to secure in the sharpener's holder. The grit is marked directly on each stone, making them easy to identify during use.

  • Type – set of coarse diamond knife sharpening stones
  • Grits – 80, 150, 240 and 400 grit
  • Stone dimensions – 160 x 20 x 9 mm
  • Abrasive surface – diamond coating on a sturdy backing
  • Compatibility – Ruixin Pro sharpening system
  • Use without a sharpener – place the stone on a damp cloth or rubber mat
  • Suitable for – repairing nicks, changing the angle and shaping a new edge
  • Package contents – 4 diamond sharpening stones (one each in 80, 150, 240 and 400 grit)

The stones can also be used without a sharpener. Place a stone on a damp cloth or non-slip mat and guide the blade over its full length with even strokes, maintaining a constant angle. Diamond stones do not need to be soaked for long, so they are ready to use almost immediately. For a damaged knife, start with the 80-grit stone, continue with the 150- and 240-grit stones, and finish coarse sharpening with the 400-grit stone. Coarse stones remove a lot of material, so do not press down on the blade and check the edge frequently. After use, rinse the stones with water, leave them to air dry and store them dry.

This set of four coarse stones is a practical choice for the workshop or home when damaged knives need repairing or their edges need reshaping. It fits the Ruixin Pro sharpener, and the individual stones are also suitable for manual use on a worktop. The graduated range of coarse grits removes steel quickly and then evens out the edge without large jumps between grits. The 160 mm length provides plenty of surface area for longer blades. The set is suitable for kitchen, pocket and outdoor knives.

Price incl. VAT €23.10