Home page Home page PC & Laptop Accessories PC Components CPU coolers and fans Set of 3 JUMPEAK CS120 ARGB 120 mm Reverse Fans Linking to 360 mm Reverse Airflow PWM For Radiator
Set of 3 JUMPEAK CS120 ARGB 120 mm Reverse Fans Linking to 360 mm Reverse Airflow PWM For Radiator

Set of 3 JUMPEAK CS120 ARGB 120 mm Reverse Fans Linking to 360 mm Reverse Airflow PWM For Radiator

Three 120 mm reverse-airflow ARGB fans link together without cables to form a 360 mm assembly. PWM control and a single cable to the motherboard. Full description
In stock
Colour:
€72.45
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Set of 3 JUMPEAK CS120 ARGB 120 mm Reverse Fans Linking to 360 mm Reverse Airflow PWM For Radiator

This set contains three JUMPEAK CS120 ARGB modular fans in a reverse version, with airflow in the opposite direction. Reverse fans are suitable where the illuminated front side should face into the case while the air flows in the opposite direction to a standard version, for example at the bottom of the case or on a side panel. Each fan measures 120 x 120 x 25 mm, and the three fans link together to form an assembly for a 360 mm radiator. The airflow of each fan is up to 59.6 CFM, and the speed of 800 to 1800 rpm is controlled by the motherboard via 4-pin PWM.

All three fans connect to one another using side locks with contacts, meaning cable-free linking. Power and lighting pass through the connections, so only one cable runs to the motherboard for the entire assembly. Each fan has 22 addressable LEDs powered by a 5 V 3-pin ARGB connector, giving the set a total of 66. The HDB hydrodynamic bearings are designed for a lifespan of 50,000 hours. The static pressure of the reverse version is 1.9 mm H2O, and the noise level of one fan at full speed does not exceed 29.4 dBA.

  • Model – JUMPEAK CS120 ARGB modular fan
  • Design – reverse version with airflow in the opposite direction
  • Dimensions of one fan – 120 x 120 x 25 mm
  • Assembly – 3 fans linked together to a length of 360 mm
  • Speed – 800–1800 rpm with PWM control
  • Airflow – 59.6 CFM per fan
  • Static pressure – 1.9 mm H2O
  • Noise level – max. 29.4 dBA per fan
  • Bearing – HDB with a lifespan of 50,000 hours
  • Lighting – 22 5 V ARGB LEDs per fan, 66 LEDs in the set
  • Connectors – 4-pin PWM and 5 V 3-pin ARGB
  • Use – PC case and 360 mm water-cooling radiator
  • Package contents – 3 CS120 ARGB reverse fans and a cable with 4-pin PWM and 3-pin ARGB connectors

The linked reverse fans are fitted in a row of three 120 mm fan positions in a case or on a 360 mm radiator. Before installation, check which direction the air needs to flow in that position, as the reverse version pushes it in the opposite direction to the standard version. The lighting is controlled using motherboard software that supports 5 V ARGB, or a separate ARGB controller, which needs to be set to at least 66 LEDs for the three fans. Do not dismantle the blades; remove dust with a brush or compressed air.

The set of three CS120 reverse fans is suitable for cases with transparent side panels, where you want to see the illuminated front side even when the fans face the opposite way, for example on the bottom panel or on a radiator. The 120 mm fans fit standard positions in cases and on radiators. A single cable to the motherboard simplifies connection of all three fans. PWM control keeps speeds low during everyday use and increases them under load. The three linked frames create a continuous strip of light that stands out behind a transparent side panel.

Price incl. VAT €72.45