Home page Home page PC & Laptop Accessories PC Components CPU coolers and fans Set of 2 JUMPEAK CS120 ARGB 120 mm Reverse Fans Connectable to 240 mm Reverse Airflow PWM For PC and Radiator
Set of 2 JUMPEAK CS120 ARGB 120 mm Reverse Fans Connectable to 240 mm Reverse Airflow PWM For PC and Radiator

Set of 2 JUMPEAK CS120 ARGB 120 mm Reverse Fans Connectable to 240 mm Reverse Airflow PWM For PC and Radiator

Two 120 mm reverse-flow ARGB fans that connect together without cables to form a 240 mm assembly. PWM control and one cable to the motherboard. Full description
In stock
Colour:
€51.48
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Set of 2 JUMPEAK CS120 ARGB 120 mm Reverse Fans Connectable to 240 mm Reverse Airflow PWM For PC and Radiator

This set contains two modular JUMPEAK CS120 ARGB fans in a reverse version with reversed airflow. Reverse fans are suitable where the illuminated front side should face into the case while the air flows in the opposite direction to a standard version, for example at the bottom of the case or on a side panel. Each fan measures 120 x 120 x 25 mm, and when connected together, the pair forms an assembly for a 240 mm radiator. The airflow of each fan is up to 59.6 CFM, and the motherboard controls the speed of 800 to 1800 rpm via 4-pin PWM.

The two fans connect to each other via side latches with contacts, allowing cable-free connection. Both power and lighting pass through the connection, so only one cable runs to the motherboard. Each fan has 22 addressable LEDs powered via a 5 V 3-pin ARGB connector. The HDB hydrodynamic bearings are designed for a service life of 50,000 hours. The static pressure of the reverse version is 1.9 mm H2O, and the noise level of a single fan at full speed does not exceed 29.4 dBA.

  • Model – JUMPEAK CS120 ARGB modular fan
  • Version – reverse version with reversed airflow
  • Dimensions of one fan – 120 x 120 x 25 mm
  • Assembly – 2 fans connected to a length of 240 mm
  • Speed – 800–1800 rpm with PWM control
  • Airflow – 59.6 CFM per fan
  • Static pressure – 1.9 mm H2O
  • Noise level – max. 29.4 dBA per fan
  • Bearing – HDB with a service life of 50,000 hours
  • Lighting – 22 5 V ARGB LEDs per fan
  • Connectors – 4-pin PWM and 5 V 3-pin ARGB
  • Use – PC case and 240 mm water-cooling radiator
  • Package contents – 2 CS120 ARGB reverse fans and a cable with 4-pin PWM and 3-pin ARGB connectors

The connected reverse fans are installed in a pair of 120 mm fan slots in a case or on a 240 mm radiator. Before installation, check which way the air should flow in that position, as the reverse version pushes it in the opposite direction to the standard version. The lighting is controlled by motherboard software that supports 5 V ARGB, or by a separate ARGB controller, which must be set to at least 44 LEDs for the pair of fans. Do not dismantle the blades; remove dust with a brush or compressed air.

The set of two CS120 reverse fans is suitable for cases with transparent side panels, where you want to see the illuminated front side of the fans even when they are facing the opposite way. The 120 mm fans fit standard slots in cases and on radiators. A single cable to the motherboard simplifies connection. PWM control keeps the speed low during everyday use and increases it under load. The assembly can be extended with another CS120 series reverse fan to a length of 360 mm.

Price incl. VAT €51.48