Home page Home page PC & Laptop Accessories PC Components CPU coolers and fans Set of 2 JUMPEAK CS120 ARGB 120 mm Fans Modular 240 mm Linking PWM 800–1800 rpm For Case and Radiator
Set of 2 JUMPEAK CS120 ARGB 120 mm Fans Modular 240 mm Linking PWM 800–1800 rpm For Case and Radiator

Set of 2 JUMPEAK CS120 ARGB 120 mm Fans Modular 240 mm Linking PWM 800–1800 rpm For Case and Radiator

Two modular 120 mm ARGB fans that link together without cables to form a 240 mm assembly. PWM control and hydrodynamic bearings for quiet operation in a PC case. Full description
In stock
Colour:
€51.05
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Set of 2 JUMPEAK CS120 ARGB 120 mm Fans Modular 240 mm Linking PWM 800–1800 rpm For Case and Radiator

The set contains two modular JUMPEAK CS120 ARGB fans in the standard version, with normal airflow direction. Each fan measures 120 x 120 x 25 mm and, when linked together, forms an assembly for a 240 mm radiator or two adjacent positions in a PC case. The seven blades on each fan deliver airflow of up to 61.7 CFM at 1800 rpm. Speeds from 800 to 1800 rpm are controlled by the motherboard via a 4-pin PWM connector. Each fan has 22 addressable LEDs, giving a total of 44 LEDs in the set.

The fans connect to each other using side locks with contacts, enabling cable-free linking. Both power and lighting signals pass through the connection from one fan to the other, so only one cable runs to the motherboard and there are fewer tangled wires in the case. HDB hydrodynamic bearings are designed for a service life of 50,000 hours. Noise from a single fan at full speed does not exceed 26.3 dBA, and the static pressure of 2.1 mm H2O is also suitable for radiators.

  • Model – JUMPEAK CS120 ARGB modular fan
  • Version – standard version with normal airflow direction
  • Dimensions of one fan – 120 x 120 x 25 mm
  • Assembly – 2 fans linked together to a length of 240 mm
  • Speed – 800–1800 rpm with PWM control
  • Airflow – 61.7 CFM per fan
  • Static pressure – 2.1 mm H2O
  • Noise level – max. 26.3 dBA per fan
  • Bearing – HDB with a service life of 50,000 hours
  • Lighting – 22 x 5 V ARGB LEDs per fan
  • Connectors – 4-pin PWM and 5 V 3-pin ARGB
  • Use – PC case and 240 mm water-cooling radiator
  • Package contents – 2 CS120 ARGB fans and cable with 4-pin PWM and 3-pin ARGB connectors

The linked fans can be fitted to a 240 mm radiator or in the front or top of a case with two positions for 120 mm fans. The lighting is controlled using motherboard software that supports 5 V ARGB or a separate ARGB controller. In the control software, set at least 44 LEDs for the two-fan set; otherwise, only some of the lighting strips will illuminate. Do not dismantle the blades, as removing them may damage the fan, and remove dust with a brush or compressed air.

The set of two CS120 fans is a practical solution for cooling a 240 mm radiator or drawing fresh air into the front of a case. The 120 mm fans fit standard positions in cases. A single cable to the motherboard simplifies installation and keeps the case tidy. PWM control keeps speeds low during normal use and increases them during demanding games. You can extend the assembly at any time with a third CS120 series fan to a length of 360 mm.

Price incl. VAT €51.05