Home page Home page Auto & Moto Garage Equipment Car mechanic tools Set of 10 Plastic PDR Pulling Tabs in Five Sizes 13 to 38 mm for Paintless Dent Repair Blue For Hot-Melt Glue
Set of 10 Plastic PDR Pulling Tabs in Five Sizes 13 to 38 mm for Paintless Dent Repair Blue For Hot-Melt Glue

Set of 10 Plastic PDR Pulling Tabs in Five Sizes 13 to 38 mm for Paintless Dent Repair Blue For Hot-Melt Glue

Ten plastic tabs in five sizes for use with hot-melt glue. They help pull out hail dents and smaller dents without repainting. Full description
In stock
€10.00
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Set of 10 Plastic PDR Pulling Tabs in Five Sizes 13 to 38 mm for Paintless Dent Repair Blue For Hot-Melt Glue

This set of plastic pulling tabs is designed for repairing dents in car bodywork using the PDR method, without the need for repainting. The pack contains 10 tabs in five sizes, with two of each size, so you can repair several dents at once. The tabs are attached to the centre of the dent using hot-melt glue. Once the glue has set, the sheet metal is pulled out using a dent puller, slide hammer or pulling bridge. The contact surface is grooved to help the hot-melt glue hold firmly. The set is suitable for hail dents, minor door dings in car parks and smaller dents on the bonnet or wing.

The tabs are made from blue plastic and have a neck with an enlarged head that the pulling tool can grip. The contact surface widths are 13, 18, 23 and 28 mm; the largest tab is 38 mm wide and rectangular. The small tabs are suitable for small, sharp dents, while the larger ones are for shallow, broader dents. Thanks to their plastic construction, the tabs are lightweight and easy to handle, even in confined spaces. When repairing a larger dent, you can start with a large tab in the centre and then work on the edges of the dent with smaller tabs. Since the set includes two tabs of each size, you can prepare one tab with glue while using the other, helping the repair go faster.

  • Type – pulling tabs for paintless dent repair (PDR)
  • Material – plastic
  • Colour – blue
  • Sizes – widths of 13 mm, 18 mm, 23 mm, 28 mm and 38 mm
  • Quantity of each size – 2 pieces
  • Contact surface – grooved for better adhesion of hot-melt glue
  • Use – with hot-melt glue and a dent puller, slide hammer or pulling bridge
  • Package contents – 10 plastic pulling tabs in five sizes (glue, glue gun and dent puller not included)

For the repair, apply hot-melt glue to the contact surface of the tab, place the tab in the centre of the dent and allow the glue to set briefly. Then attach the pulling tool and use a smooth pulling motion to gradually straighten the sheet metal. Spray alcohol onto the glue to release it from the bodywork and the tab, then simply peel it off. Clean any glue residue from the tab and it is ready to use on another dent.

This set of ten plastic tabs is a practical addition to your paintless bodywork repair kit. The five sizes, ranging from 13 to 38 mm, cover small and larger dents on car doors, the bonnet or roof. The tabs can be used with standard hot-melt glue and pulling tools you may already have in your garage. They are suitable for DIY enthusiasts and as replacement tabs for a workshop. The lightweight, compact pack of 10 tabs is easy to store in a toolbox.

Price incl. VAT €10.00