Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Set of 10 Diamond Hole Saws 10 mm Hex Shank 6.35 mm Length 80 mm Black Dry Drilling of Holes in Tiles and Stone
Set of 10 Diamond Hole Saws 10 mm Hex Shank 6.35 mm Length 80 mm Black Dry Drilling of Holes in Tiles and Stone

Set of 10 Diamond Hole Saws 10 mm Hex Shank 6.35 mm Length 80 mm Black Dry Drilling of Holes in Tiles and Stone

Ten identical 10 mm hole saws for wall plugs and pass-throughs. The brazed diamond tip cuts through wall tiles, vitrified tiles, marble and granite without water. Full description
In stock
€39.69
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Set of 10 Diamond Hole Saws 10 mm Hex Shank 6.35 mm Length 80 mm Black Dry Drilling of Holes in Tiles and Stone

Ten 10 mm diameter diamond hole saws cover holes for larger wall plugs, anchors and service runs in ceramic floor tiles, wall tiles and stone. A 10 mm hole is used when hanging wall cabinets and TV brackets, and when routing a hose to a tap or dishwasher. Each hole saw has a 6.35 mm hex shank and fits cordless drills and impact drivers. The brazed diamond tip works dry, so there is no need for a container of water or hammer action. The tool has a total length of 80 mm and a 42 mm working section.

Ten identical pieces in one pack save time on larger jobs. The diamond tip wears down according to the hardness of the surface, and with a full box you will not need to interrupt work because of a single worn tool. The hollow design removes only a ring of material, leaving the drilled core inside the hole saw. The drill therefore needs less force, and the edge of the hole remains clean, with no chipped glaze. All the hole saws have the same shank, so you can swap them without readjusting the chuck or searching for an adaptor. The clearly visible scale on the body shows the drilling depth as you work.

  • Number of pieces – 10 identical hole saws
  • Diameter – 10 mm
  • Type – hollow core drill bit with brazed diamond
  • Shank – 6.35 mm hex
  • Total length – 80 mm
  • Working section – 42 mm
  • Material – steel body with diamond segment
  • Drilling method – dry, without water cooling
  • Suitable for – ceramic floor tiles, wall tiles, vitrified tiles, marble and granite
  • Colour – black
  • Package contents – 10 diamond hole saws, 10 mm diameter

Switch off hammer action before drilling and apply only light pressure. Start the hole at an angle and, once the diamond has bitten, straighten the hole saw to a perpendicular position. Withdraw the tool slightly every few seconds to clear dust from the hole and cool the tip. On smooth glaze, a piece of masking tape will help keep the hole saw in place until it bites. Once drilling is complete, tap out the core and return the dry tool to its box. Keep the speed in the lower half of the range, as the diamond grinds away the material and high speed unnecessarily heats the tip.

The pack of ten is ideal for tilers, installation companies and DIY enthusiasts renovating an entire home. With a single size, you can handle most anchors for heavier brackets and will not need to look for a replacement during installation. The 10 mm diameter is one of the most common sizes for furniture anchors and water service runs. Dry drilling keeps the job clean without wet floors, and the dust can simply be extracted with a vacuum cleaner held next to the hole. Ten pieces are enough for a bathroom renovation or a series of customer installations without needing to buy more. The same brazed diamond segment is fitted to the tip of every hole saw in the pack.

Price incl. VAT €39.69