Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Set of 10 Diamond Core Drill Bits 8 mm Hexagonal Shank 6.35 mm Length 80 mm Black Dry Drilling of Holes in Tiles
Set of 10 Diamond Core Drill Bits 8 mm Hexagonal Shank 6.35 mm Length 80 mm Black Dry Drilling of Holes in Tiles

Set of 10 Diamond Core Drill Bits 8 mm Hexagonal Shank 6.35 mm Length 80 mm Black Dry Drilling of Holes in Tiles

Ten pieces with an 8 mm diameter for anchors and larger wall plugs. The brazed diamond tip can handle ceramic tiles porcelain tiles marble and granite completely without water. Full description
In stock
€37.51
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Set of 10 Diamond Core Drill Bits 8 mm Hexagonal Shank 6.35 mm Length 80 mm Black Dry Drilling of Holes in Tiles

Ten diamond core drill bits with an 8 mm diameter cover holes for larger wall plugs and anchors in ceramic floor tiles wall tiles and stone. The 8 mm diameter is used for mirrors grab rails washbasin brackets and cable pass-throughs. Each core drill bit has a 6.35 mm hexagonal shank and fits a cordless drill or impact driver. The brazed diamond tip works dry so you can complete the installation in a finished bathroom without a container of water. The core drill bit has a total length of 80 mm and a working section measuring 42 mm.

The larger diameter removes more material and the diamond tip wears faster than on smaller sizes. The pack of ten therefore means you will not have to interrupt the job because of a single blunt tool. The hollow design removes only a ring of material, leaving the drilled core inside. This means the drill needs less force and the hole has a clean edge. The 42 mm working section passes through the tile and layer of adhesive in one go.

  • Number of pieces – 10 identical core drill bits
  • Diameter – 8 mm
  • Type – hollow core drill bit with brazed diamond
  • Shank – hexagonal, 6.35 mm
  • Total length – 80 mm
  • Working section – 42 mm
  • Material – steel body with diamond segment
  • Drilling method – dry, without water cooling
  • Suitable for – ceramic floor tiles, wall tiles, porcelain tiles, marble and granite
  • Colour – black
  • Package contents – 10 diamond core drill bits with an 8 mm diameter

Switch off the hammer action when drilling and apply only light pressure. Start the hole at an angle and straighten the core drill bit once the diamond has bitten into the material. Every few seconds, pull the tool out slightly to clear the dust and cool the tip. Once drilling is complete, tap out the core and store the core drill bit dry. On a glazed surface, start at an angle or cover the spot with masking tape to prevent the tool from slipping. Keep the speed low and let the diamond do the work of grinding away the material. Extract the dust directly at the hole so it does not remain in the joints or silicone.

The pack of ten is intended for tilers, installation contractors and DIY enthusiasts renovating several rooms at once. With one diameter, you can handle most anchors for heavier brackets and do not have to look for a replacement during the job. The 8 mm diameter is, along with 6 mm, one of the most common wall plug sizes in the bathroom and kitchen. Dry drilling saves time as there is no need to prepare water or clean up a wet floor; a vacuum cleaner at the hole is all you need. The core drill bits fit into the same holder repeatedly, so changing them takes only a moment. The ten pieces are also enough for a complete bathroom renovation or a series of installations at customers’ premises without needing to buy more. Storing them back in the box protects the diamond layer from rubbing against other tools.

Price incl. VAT €37.51