Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Set of 10 6 mm Diamond Core Drill Bits Hexagonal Shank 6.35 mm Length 68 mm Black Dry Drilling in Tiles and Granite
Set of 10 6 mm Diamond Core Drill Bits Hexagonal Shank 6.35 mm Length 68 mm Black Dry Drilling in Tiles and Granite

Set of 10 6 mm Diamond Core Drill Bits Hexagonal Shank 6.35 mm Length 68 mm Black Dry Drilling in Tiles and Granite

Ten identical 6 mm diameter core drill bits for tradespeople and larger installation jobs. Brazed diamond cuts through wall tiles vitrified tiles marble and granite completely dry. Full description
In stock
€30.96
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Set of 10 6 mm Diamond Core Drill Bits Hexagonal Shank 6.35 mm Length 68 mm Black Dry Drilling in Tiles and Granite

This pack of ten 6 mm diameter diamond core drill bits is designed for anyone who regularly drills through tiles. A 6 mm hole is one of the most common sizes for wall plugs used for shelf brackets and bathroom fittings, and one core drill bit is not enough for a larger installation job. All ten have a 6.35 mm hexagonal shank, so you can fit them into a cordless drill or an impact driver. The diamond grit is permanently brazed onto the cutting edge and drills dry, without water cooling. Each core drill bit is 68 mm long, with a 35 mm working section.

A pack of ten is particularly useful on site. The diamond cutting edges wear down depending on the hardness of the material, and with a full box you won't have to interrupt your work because a single tool has worn out. The hollow design removes only a ring of material, leaving the core inside the bit. This keeps the edge of the hole clean and prevents the glaze from chipping. The markings on the body indicate the drilling depth in the tile.

  • Number of pieces – 10 identical core drill bits
  • Diameter – 6 mm
  • Type – hollow core drill bit with brazed diamond
  • Shank – 6.35 mm hexagonal
  • Overall length – 68 mm
  • Working section – 35 mm
  • Material – steel body with diamond segment
  • Drilling method – dry, without water cooling
  • Suitable for – ceramic floor tiles, wall tiles, vitrified tiles, marble and granite
  • Colour – black
  • Pack contents – 10 diamond core drill bits with a diameter of 6 mm

Drill without hammer action and apply light pressure. Start the hole at an angle, then straighten the core drill bit to a perpendicular position once the diamond has gained a bite. Periodically pull the tool out slightly to clear dust from the hole. Set a worn core drill bit aside and use another to avoid putting unnecessary strain on the drill. On smooth glaze, a piece of masking tape can help keep the tool in place until it bites. Keep the speed in the lower half of the range and apply light pressure, as the diamond removes material by abrasion. Use a vacuum cleaner to extract dust directly at the hole so it does not settle in the joints of the finished surface.

Tilers, installation companies and DIYers renovating an entire bathroom will appreciate having ten bits of the same diameter. The set will last for many holes for shelves, mirrors, grab rails and pipework, so you won't have to replenish it while working. The 6 mm diameter matches the most common wall plugs, so a single drill bit size will handle most fittings. Dry drilling means clean work, with no water container and no wet floor in a finished bathroom. The core drill bits are also useful as spares in a service van, where downtime caused by a missing drill bit is costly. After use, simply tap the core out of each bit and put it back in the box dry. The 35 mm working section is suitable for standard tiles and the adhesive beneath them, allowing you to complete the hole in one go.

Price incl. VAT €30.96