Home page Home page Auto & Moto Car Spare Parts Car body parts Self-Adhesive Windscreen Seal 14 mm Length 2 m Rubber Sealing Strip with T Profile Black Water and Dust Gap Protection
Self-Adhesive Windscreen Seal 14 mm Length 2 m Rubber Sealing Strip with T Profile Black Water and Dust Gap Protection

Self-Adhesive Windscreen Seal 14 mm Length 2 m Rubber Sealing Strip with T Profile Black Water and Dust Gap Protection

Narrow black strip 14 mm wide for the gap between the glass and the bodywork. 2 m roll with adhesive tape for the side edges of the windscreen and other smaller gaps on the vehicle. Full description
In stock
€15.24
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Self-Adhesive Windscreen Seal 14 mm Length 2 m Rubber Sealing Strip with T Profile Black Water and Dust Gap Protection

The self-adhesive car glass seal is a rubber strip that fills and covers the gap between the glass and the bodywork. The profile is T-shaped and has an overall width of 14 mm, making it suitable for the side edges of the windscreen. The underside is coated with adhesive tape protected by a red film, allowing you to attach the strip without drilling or screwing. The seal helps protect the gap from water and dust while giving the edge of the glass a cleaner appearance. The strip is supplied in a roll and can be cut to the required length.

The central protrusion of the profile fits into the gap between the glass and the metal, and the two side wings, measuring 7 mm and 5 mm, press against both surfaces. According to the seller's diagram, the strip can be applied at various angles, making it adaptable to slightly different shapes of gaps on various vehicles. The length of 2 m corresponds, according to the seller's schematic, to approximately one side of the windscreen, where the narrower 14 mm profile is most commonly used. It is also suitable for other shorter gaps between the glass and metal, such as around a smaller sunroof, if the length is sufficient.

  • Type – self-adhesive sealing strip for the gap between the glass and the bodywork
  • Profile – T-shaped with a central protrusion
  • Width – 14 mm (side wings 7 mm and 5 mm)
  • Length – 2 m
  • Material – rubber
  • Attachment – adhesive tape with protective film
  • Colour – black
  • Usage – windscreen, rear window, sunroof, and roof of passenger cars
  • Contents of the package – 1 roll of sealing strip measuring 2 m

Before installation, thoroughly clean and degrease the surface of the glass and bodywork to ensure the adhesive tape adheres well. First, position the strip without removing the protective film, measure the required length, and then gradually peel off the protective film while pressing the strip along its entire length. It adheres best at room temperature on a dry surface. When applying, proceed slowly over shorter sections and continuously align the strip to follow the edge of the glass without waves or tension. Cut the ends of the strip straight and press them down for a little longer, as this area is under the most stress. For the sunroof, be aware that after applying the strip around its edge, the window will no longer open, as noted by the seller. The adhered seal can then be cleaned with regular car care products during car washes.

This rubber strip is a simple way to seal and visually align the gap around the glass without visiting a service centre. The universal T profile, according to the seller, is suitable for most passenger cars. One roll measuring 2 m will cover a shorter section of the gap and is ideal where you only need to seal one side of the glass. The black colour of the strip blends with the glass frame and most seals on the vehicle. You can manage the installation yourself thanks to the adhesive tape and ordinary scissors for trimming.

Price incl. VAT €15.24