Home page Home page Auto & Moto Car Spare Parts Car body parts Self-Adhesive Sealing Strip for Front and Rear Car Windows 19 mm Length 4 m Rubber Seal Profile T Black Water and Dust Protection
Self-Adhesive Sealing Strip for Front and Rear Car Windows 19 mm Length 4 m Rubber Seal Profile T Black Water and Dust Protection

Self-Adhesive Sealing Strip for Front and Rear Car Windows 19 mm Length 4 m Rubber Seal Profile T Black Water and Dust Protection

A 4 m roll of a 19 mm wide strip is sufficient for the edge of both the front and rear windows. The T profile covers the gap at the bodywork and the adhesive tape holds the strip firmly in place. Full description
In stock
€22.23
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Self-Adhesive Sealing Strip for Front and Rear Car Windows 19 mm Length 4 m Rubber Seal Profile T Black Water and Dust Protection

The self-adhesive car window seal is a rubber strip that fills and covers the gap between the glass and the bodywork. The profile is T-shaped with an overall width of 19 mm, making it suitable for the edge of both the front and rear windows. The underside is coated with adhesive tape protected by a red film, allowing you to attach the strip without drilling or screwing. The seal helps protect the gap from water and dust while providing a cleaner appearance to the edge of the glass. The strip is supplied in a roll and can be cut to the required length.

The central protrusion of the profile fits into the gap between the glass and the metal, and the two side wings, measuring 9 mm and 8 mm, press against both surfaces. According to the seller's diagram, the strip can be fitted at various angles, accommodating slightly different gap shapes on different vehicles. The 4 m long roll will cover, as per the seller's schematic, the upper edge of the front window and the upper edge of the rear window, with approximately 2 m allocated for each. One package can thus seal both the front and rear parts of the vehicle at once.

  • Type – self-adhesive sealing strip for the gap between glass and bodywork
  • Profile – T-shaped with a central protrusion
  • Width – 19 mm (side wings 9 mm and 8 mm)
  • Length – 4 m
  • Material – rubber
  • Attachment – adhesive tape with protective film
  • Colour – black
  • Usage – front window, rear window, sunroof, and roof of passenger cars
  • Contents of the package – 1 roll of sealing strip measuring 4 m

Before installation, thoroughly clean and degrease the surfaces of the glass and bodywork to ensure the adhesive tape adheres well. First, hold the strip in place temporarily, measure the required length, and then gradually peel off the protective film while pressing the strip down along its entire length. It adheres best at room temperature on a dry surface. When applying, proceed slowly over shorter sections and continuously adjust the strip to ensure it follows the edge of the glass without waves or tension. Cut the ends of the strip straight and press them down a little longer, as this is where the tape is most stressed. The installed seal can then be cleaned with regular car care products during car washes.

This rubber strip is a simple way to seal and visually align the gap around the glass without visiting a service centre. The universal T profile, according to the seller, fits most passenger cars. The 4 m roll is advantageous when you want to seal both the front and rear windows with one package. The black colour of the strip blends with the glass frame and most seals on the vehicle. You can manage the installation yourself thanks to the adhesive tape and ordinary scissors for shortening.

Price incl. VAT €22.23