Home page Home page Auto & Moto Car Spare Parts Car body parts Self-Adhesive Sealing Strip for Front and Rear Car Windows 19 mm Length 2 m Rubber T-Profile Black Sealing the Gap Between Glass and Bodywork
Self-Adhesive Sealing Strip for Front and Rear Car Windows 19 mm Length 2 m Rubber T-Profile Black Sealing the Gap Between Glass and Bodywork

Self-Adhesive Sealing Strip for Front and Rear Car Windows 19 mm Length 2 m Rubber T-Profile Black Sealing the Gap Between Glass and Bodywork

Wider strip 19 mm on a 2 m roll for the top edge of the front or rear window. Covers the gap at the bodywork and holds firmly without screws thanks to the adhesive tape. Full description
In stock
€17.86
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Self-Adhesive Sealing Strip for Front and Rear Car Windows 19 mm Length 2 m Rubber T-Profile Black Sealing the Gap Between Glass and Bodywork

The self-adhesive car window seal is a rubber strip that fills and covers the gap between the glass and the bodywork. The profile is shaped like a T and has an overall width of 19 mm, making it well-suited for the top edge of the front or rear window. On the underside, there is an applied adhesive tape protected by a red film, allowing you to attach the strip without drilling or screwing. The seal helps protect the gap from water and dust while giving the edge of the glass a cleaner appearance. The strip is supplied on a roll and can be cut to the required length.

The central protrusion of the profile fits into the gap between the glass and the metal, and the two side wings, measuring 9 mm and 8 mm wide, press against both surfaces. According to the seller's drawing, the strip can be installed at various angles, making it suitable for slightly different gap shapes on various vehicles. The 2 m roll corresponds to one edge of the windscreen or one edge of the rear window, where the wider 19 mm profile is used. Thus, the strip is very useful when replacing worn seals in one location.

  • Type – self-adhesive sealing strip for the gap between glass and bodywork
  • Profile – T-shape with a central protrusion
  • Width – 19 mm (side wings 9 mm and 8 mm)
  • Length – 2 m
  • Material – rubber
  • Attachment – self-adhesive tape with protective film
  • Colour – black
  • Use – windscreen, rear window, sunroof, and roof of passenger cars
  • Contents – 1 roll of sealing strip measuring 2 m

Before installation, thoroughly clean and degrease the surfaces of the glass and bodywork to ensure good adhesion of the tape. First, lay the strip in place without removing the protective film, measure the required length, and then gradually pull off the protective film while pressing the strip along its entire length. It adheres best at room temperature to a dry surface. When applying, proceed slowly over shorter sections and continuously align the strip to follow the edge of the glass without waves or tension. Cut the ends of the strip straight and press them down for a little longer, as this is where the tape is most stressed. The adhered seal can then be cleaned with regular car care products during car washing.

This rubber strip is a simple way to seal and visually align the gap around the glass without visiting a garage. The universal T-profile is suitable for most passenger cars, according to the seller. The 2 m length is adequate for sealing one edge of the glass, and you won't be left with much excess strip. The black colour of the strip blends with the glass frame and most seals on the vehicle. You can manage the installation yourself thanks to the adhesive tape and ordinary scissors for trimming.

Price incl. VAT €17.86