Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Auto & Moto Car Interior Accessories Car Sun Shades Self-Adhesive Matte Coloured Film 10x152 cm Tuning PVC Film for Bonnet in Matte Finish Bubble-Free
Self-Adhesive Matte Coloured Film 10x152 cm Tuning PVC Film for Bonnet in Matte Finish Bubble-Free
Self-Adhesive Matte Coloured Film 10x152 cm Tuning PVC Film for Bonnet in Matte Finish Bubble-Free red
Self-Adhesive Matte Coloured Film 10x152 cm Tuning PVC Film for Bonnet in Matte Finish Bubble-Free 1
Self-Adhesive Matte Coloured Film 10x152 cm Tuning PVC Film for Bonnet in Matte Finish Bubble-Free 2
Self-Adhesive Matte Coloured Film 10x152 cm Tuning PVC Film for Bonnet in Matte Finish Bubble-Free 3
Self-Adhesive Matte Coloured Film 10x152 cm Tuning PVC Film for Bonnet in Matte Finish Bubble-Free 4
Self-Adhesive Matte Coloured Film 10x152 cm Tuning PVC Film for Bonnet in Matte Finish Bubble-Free 5

Self-Adhesive Matte Coloured Film 10x152 cm Tuning PVC Film for Bonnet in Matte Finish Bubble-Free

Matte coloured film 10x152 cm for vehicle tuning. Easy application without bubbles, UV and water resistant, easily removable without residue. Full description
In stock
Colour:
€18.30
Overview

Self-Adhesive Matte Coloured Film 10x152 cm Tuning PVC Film for Bonnet in Matte Finish Bubble-Free

This self-adhesive film in matte colour is the ideal choice for minor tuning modifications or protecting detailed parts of the vehicle. The high-quality PVC material easily conforms to the shapes of the bodywork and thanks to the air-release technology, installation without bubbles is very easy. The film is resistant to UV rays, water, scratches, and weather conditions. It leaves no adhesive residue upon removal and is gentle on paint or plastic surfaces.

  • Matte coloured surface – subtle appearance for detailed modifications
  • Highly flexible PVC – adapts to curved surfaces
  • Air-release system – easy application without air pockets
  • Resistance to UV, water, dust, and scratches
  • Removable without residue – does not damage paint or plastic
  • Suitable for tuning, renovation, and protection of both interior and exterior parts
  • Contents: 1× film 10 x 152 cm (chosen colour)

Instructions for use:

  1. Clean the surface where you will apply the film (isopropyl alcohol is recommended).
  2. Cut the desired size of the film – add a few extra centimetres.
  3. Remove the protective layer and carefully stick the film onto the surface.
  4. Using a squeegee, gradually push out the air and smooth the film from the centre to the edges.
  5. For better adhesion, the film can be slightly warmed (e.g. with a hairdryer or heat gun).
  6. Align the edges and trim with a sharp knife.

This film represents an easy way to give your vehicle a new look without permanent modifications. Matte effect, easy application, and durability make it the perfect solution for everyday tuning and practical protection.

Delivery and Returns
Total price incl. VAT €18.30