Home page Home page Auto & Moto Car Spare Parts Car body parts Self-adhesive Glass and Roof Seal 14 mm Length 4 m Rubber Sealing Strip T Profile Black Against Water Dust and Wind Noise
Self-adhesive Glass and Roof Seal 14 mm Length 4 m Rubber Sealing Strip T Profile Black Against Water Dust and Wind Noise

Self-adhesive Glass and Roof Seal 14 mm Length 4 m Rubber Sealing Strip T Profile Black Against Water Dust and Wind Noise

14 mm sealing strip on a 4 m roll for both side edges of the windscreen or the gap around the sunroof. The adhesive tape on the underside facilitates installation. Full description
In stock
€20.48
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Self-adhesive Glass and Roof Seal 14 mm Length 4 m Rubber Sealing Strip T Profile Black Against Water Dust and Wind Noise

The self-adhesive car glass seal is a rubber strip that fills and covers the gap between the glass and the bodywork. The profile is T-shaped and has an overall width of 14 mm, making it suitable for both side edges of the windscreen or the gap around the sunroof. An adhesive tape is applied to the underside, protected by a red film, allowing you to attach the strip without drilling or screwing. The seal helps protect the gap from water and dust while giving the edge of the glass a cleaner appearance. The strip is supplied on a roll and can be cut to the required length.

The central protrusion of the profile fits into the gap between the glass and the metal, and the two side wings, measuring 7 mm and 5 mm, press against both surfaces. According to the seller's diagram, the strip can be installed at various angles, allowing it to accommodate slightly different gap shapes on different vehicles. A roll length of 4 m is sufficient, according to the seller's schematic, for both side edges of the windscreen, where approximately 2 m is estimated for one side. It can also be effectively used around a smaller sunroof, for which the seller indicates approximately 3 m of strip.

  • Type – self-adhesive sealing strip for the gap between glass and bodywork
  • Profile – T-shaped with a central protrusion
  • Width – 14 mm (side wings 7 mm and 5 mm)
  • Length – 4 m
  • Material – rubber
  • Attachment – self-adhesive tape with protective film
  • Colour – black
  • Usage – windscreen, rear window, sunroof, and roof of passenger cars
  • Package Contents – 1 roll of sealing strip measuring 4 m

Before installation, thoroughly clean and degrease the surface of the glass and bodywork to ensure the adhesive tape adheres well. First, position the strip dry, measure the required length, and then gradually peel off the protective film while pressing the strip along its entire length. It adheres best at room temperature to a dry surface. When applying, proceed slowly over shorter sections and continuously align the strip to follow the edge of the glass without waves or tension. Cut the ends of the strip straight and press them down a little longer, as this is where the tape is under the most strain. With the sunroof, keep in mind that once the strip is applied around its edge, the window will no longer be operable, as the seller also points out. The applied seal can then be cleaned with regular car care products during car washes.

This rubber strip is a simple way to seal and visually align the gap around the glass without a visit to the service centre. The universal T profile, according to the seller, fits most passenger cars. The longer 4 m roll is practical when you want to seal both sides of the glass or the perimeter of a smaller sunroof with one package. The black colour of the strip blends with the glass frame and most seals on the vehicle. You can manage the installation yourself thanks to the adhesive tape and ordinary scissors for trimming.

Price incl. VAT €20.48