Home page Home page Auto & Moto Car Spare Parts Car body parts Self-Adhesive Car Door Seal Z Profile 25 mm Length 4 m Rubber Sealing Strip Black Against Wind Noise Water and Dust for A B C Pillars
Self-Adhesive Car Door Seal Z Profile 25 mm Length 4 m Rubber Sealing Strip Black Against Wind Noise Water and Dust for A B C Pillars

Self-Adhesive Car Door Seal Z Profile 25 mm Length 4 m Rubber Sealing Strip Black Against Wind Noise Water and Dust for A B C Pillars

The rubber strip with adhesive tape seals the gap between the door and the bodywork, reduces wind noise and limits water and dust from entering your car’s interior. Full description
In stock
€18.30
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Self-Adhesive Car Door Seal Z Profile 25 mm Length 4 m Rubber Sealing Strip Black Against Wind Noise Water and Dust for A B C Pillars

The self-adhesive Z-profile car door seal is a practical accessory for any driver bothered by wind noise or draughts around the doors. The strip has an overall width of 25 mm and comes in a 4 m roll, so you can easily cut it to the exact length you need. The seal is applied in the gap between the door and the bodywork, where it fills the space when the door is closed, preventing air, water and dust from entering. It is suitable for additional sealing around the pillars and door frames, and complements the vehicle’s original seals. Its universal shape makes it suitable for most passenger cars.

The strip is made from flexible rubber, which adapts well to the curved contours of the bodywork. Its profile consists of a flat section with adhesive tape and a curved hollow lip, 8 mm high, which compresses when the door is closed and fills the gap. The strip can be bent and twisted without becoming permanently deformed, so it follows the curves of the doors and the corners of the frame. The underside is coated with self-adhesive tape protected by a red release liner, allowing you to install it without tools or drilling.

  • Type – self-adhesive Z-profile car door sealing strip
  • Material – rubber
  • Colour – black
  • Overall profile width – 25 mm
  • Profile dimensions – 13 mm adhesive section and 12 mm lip, 8 mm high
  • Length – 4 m
  • Attachment – self-adhesive tape with release liner
  • Use – A, B and C pillars and door frames of passenger cars
  • Package contents – 1 roll of sealing strip, 4 m long

Before installation, thoroughly clean and degrease the application area to ensure the tape adheres well. Measure the required length, cut the strip with scissors or a knife, and press it onto the surface gradually while peeling off the release liner. Apply it to a dry surface at a normal temperature, ideally not in freezing conditions. You can divide one roll between several doors, for example, using it on the front pillar, centre pillar and rear section of the door. Once applied, check that the doors close easily and that the strip sits flush along its entire length.

The Z-profile sealing strip is a simple way to make your journeys quieter and better protect your car’s interior from water and dust. The 4 m roll is long enough to seal several areas of the bodywork, and the flexible rubber profile easily adapts to the shape of the doors. Installation is quick thanks to the adhesive tape and requires no modifications to the vehicle. The strip is ideal for drivers of older cars as well as owners of newer vehicles who want to reduce wind noise at higher speeds. It is a practical, affordable upgrade for everyday driving.

Price incl. VAT €18.30