Home page Home page Auto & Moto Car Spare Parts Car body parts Self-Adhesive Car Door Seal Small D Profile 10 x 12 mm 3 m Length Rubber Sealing Strip with Adhesive Tape Black Against Noise Water and Dust
Self-Adhesive Car Door Seal Small D Profile 10 x 12 mm 3 m Length Rubber Sealing Strip with Adhesive Tape Black Against Noise Water and Dust

Self-Adhesive Car Door Seal Small D Profile 10 x 12 mm 3 m Length Rubber Sealing Strip with Adhesive Tape Black Against Noise Water and Dust

Hollow D-shaped rubber strip in a 3 m roll for doors, boot lids and bonnets. Reduces wind noise and limits water and dust entering the vehicle interior. Full description
In stock
€13.49
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Self-Adhesive Car Door Seal Small D Profile 10 x 12 mm 3 m Length Rubber Sealing Strip with Adhesive Tape Black Against Noise Water and Dust

The self-adhesive car door seal with a small D profile helps seal gaps between the bodywork and the doors, boot lid or bonnet. The strip is supplied in a 3 m roll and has a cross-section measuring 10 x 12 mm. The hollow profile compresses when the door is closed and fills the gap through which wind noise, water and dust enter the interior. The underside has adhesive tape protected by a red backing film, so you can fit it without tools or drilling. The seal is universal and can be used on most cars.

The strip is made of rubber and has a hollow interior, allowing it to flex and return to its original shape after being compressed. The small D profile is suitable where there is a narrower gap between the door and the bodywork and a larger strip would prevent the door from closing. The black colour blends in with standard seals in the vehicle, so the added strip does not look out of place. The 3 m roll is suitable for adding a seal to one opening, such as a door frame or around the boot lid. The seal can be fitted to door frames, the edge of the boot opening, under the bonnet and around car windows.

  • Type – self-adhesive sealing strip with a hollow D profile
  • Profile size – small D profile
  • Cross-section dimensions – width 10 mm and height 12 mm
  • Length – 3 m in one roll
  • Material – rubber
  • Attachment – adhesive tape with red backing film
  • Colour – black
  • Use – car doors, boot lid, bonnet and window frames
  • Function – reduces wind noise and protects against water and dust
  • Package contents – 1 roll of sealing strip, 3 m long

Before fitting, clean and degrease the surface thoroughly and let it dry so the tape adheres well. First, position the strip without removing the backing and mark its route. Then gradually peel off the red film and press the tape firmly along its entire length. Position the strip on the door frame or around the edge of the opening so that it compresses evenly when the door is closed. Trim the end of the strip to the required length and ensure the joint fits snugly without a gap. Press the strip more firmly at the corners and ends to ensure the tape adheres well, including where the strip bends.

The self-adhesive sealing strip with a small D profile is a simple way to improve the sealing of doors and other openings in your car. It helps reduce wind noise while driving and limits water and dust entering the interior. The 3 m roll with adhesive tape allows fitting without drilling or making any changes to the bodywork. The strip has a cross-section measuring 10 x 12 mm and is suitable for the doors, boot and bonnet of most cars.

Price incl. VAT €13.49