LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Sports & Outdoor Electric bikes Off-road e-bikes RYET Oversized Derailleur Pulleys with Disk Upper 13T and Lower 19T Ceramic Bearings Aluminium Black for Ultegra R8000 and Dura-Ace
RYET Oversized Derailleur Pulleys with Disk Upper 13T and Lower 19T Ceramic Bearings Aluminium Black for Ultegra R8000 and Dura-Ace

RYET Oversized Derailleur Pulleys with Disk Upper 13T and Lower 19T Ceramic Bearings Aluminium Black for Ultegra R8000 and Dura-Ace

RYET oversized pulleys 13T and 19T with lower pulley cover and ceramic bearings. Suitable for Ultegra R8000 and R8100 series and Dura-Ace derailleur. Full description
In stock
€175.50
Safe shopping Safe shopping
Overview
RYET Oversized Derailleur Pulleys with Disk Upper 13T and Lower 19T Ceramic Bearings Aluminium Black for Ultegra R8000 and Dura-Ace

RYET oversized derailleur pulleys are designed for Ultegra and Dura-Ace derailleurs and replace the original chain guide including the pulleys. The set consists of an extended cage, an upper pulley with 13 teeth, and a lower pulley with 19 teeth. The lower pulley is fitted with a disk cover that conceals its central part. The pulleys are made of aluminium and are mounted on full ceramic bearings. The cage is fitted at the upper end with a metal axle with a bearing for connection to the derailleur body.

  • Oversized Design – the extended cage with a larger lower pulley replaces the original derailleur guide. The set is supplied as a whole, so the pulleys do not need to be installed separately into the cage.
  • Upper Pulley 13T – the upper pulley has 13 teeth and is located at the top of the cage near the axle. The teeth of the pulley are shaped for guiding the chain.
  • Lower Pulley 19T with Disk – the lower pulley has 19 teeth and its central part is covered by a disk cover with the RYET logo.
  • Aluminium Pulleys – both pulleys are made of aluminium.
  • Full Ceramic Bearings – the pulleys are mounted on full ceramic bearings, which are pressed into the centre of each pulley.
  • Axle for Connection – at the top of the cage is an axle with a bearing, which serves to connect the cage to the derailleur body.
  • Cage – the cage is shaped and perforated at the bottom. At the bottom, it bears the RYET logo and the inscription Inspire, Encourage.
  • Ultegra Compatibility – the set is designed for Ultegra derailleurs RD-8000, RD-8020, RD-8025, RD-8050, RD-8070, RD-8100, RD-8150, and RD-8170.
  • Dura-Ace Compatibility – the set is also intended for Dura-Ace derailleurs RD-9100, RD-9120, RD-9150, RD-9170, RD-9200, RD-9250, and RD-9270.
  • Installation – the original derailleur guide is removed and replaced with the oversized cage with pulleys. After installation, it is advisable to check the derailleur adjustment and chain length.
  • Maintenance – regularly clean the pulleys and cage from dirt and residue of lubricant. When cleaning the chain, pay attention to the teeth of the pulleys as well.
  • Colour Scheme – both the cage and the pulleys are black, while the disk of the lower pulley is grey.

Contents of the Package:

  • 1x oversized derailleur cage with upper pulley 13T and lower pulley 19T with disk

RYET oversized derailleur pulleys are suitable for cyclists who wish to replace the original chain guide on their road bike with an oversized version. The set is compatible with Ultegra series R8000 and R8100 and Dura-Ace series R9100 and R9200 (a list of specific models can be found above). The aluminium pulleys are mounted on full ceramic bearings and the lower pulley is fitted with a disk cover. We recommend that the installation be carried out by a service or experienced mechanic, as it requires the removal of the original guide and subsequent adjustment of the derailleur. Before ordering, please verify that your derailleur model is listed in the compatible models list.

Price incl. VAT €175.50