Home page Home page Hobbies & Garden Tools Soldering Irons & Accessories Running Light Kit for Soldering with NE555 and CD4017 Circuits Ten Red LEDs and Trimmer Power Supply 3–6 V Soldering Kit for Education
Running Light Kit for Soldering with NE555 and CD4017 Circuits Ten Red LEDs and Trimmer Power Supply 3–6 V Soldering Kit for Education

Running Light Kit for Soldering with NE555 and CD4017 Circuits Ten Red LEDs and Trimmer Power Supply 3–6 V Soldering Kit for Education

Soldering kit for the effect of gradually lighting LEDs. NE555 timer and CD4017 counter on a clear board, ideal first project for soldering training. Full description
In stock
€4.76
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Running Light Kit for Soldering with NE555 and CD4017 Circuits Ten Red LEDs and Trimmer Power Supply 3–6 V Soldering Kit for Education

The running light kit is a soldering kit from which you can assemble the effect of gradually lighting LEDs. The circuit is based on a pair of proven integrated circuits: the NE555 timer generates regular pulses and the decimal CD4017 counter sequentially sends them to individual outputs. The board features a series of ten red LEDs that light up one after the other, creating the illusion of light running along the board. The kit is supplied as loose components for soldering, allowing you to assemble the entire circuit from the first component to the last connection. It is suitable for beginners in electronics, students, and hobbyists who want to try soldering on a simple and illustrative project.

The printed circuit board has printed component markings, making it clear where each component belongs during assembly. In addition to the two integrated circuits, it includes resistors, an electrolytic capacitor, a ceramic capacitor, a trimmer marked 104, and a pin header for connecting the power supply. The power input is marked 3–6 V on the board, so you can power the circuit from a battery holder or a suitable laboratory power supply. This circuit clearly demonstrates how the pulse generator and counter work together, and therefore the kit is often used as a demonstration in electronics classes.

  • Type – running light kit for soldering
  • Integrated Circuits – NE555 timer and CD4017 decimal counter
  • Lighting Effect – 10 red LEDs lit sequentially
  • Adjustable Component – trimmer marked 104
  • Power Supply – input on the board marked 3–6 V
  • Power Connection – pin header
  • Execution – loose components for soldering and assembly
  • Purpose – electronics education and soldering training
  • Package Contents – printed circuit board and running light component kit (NE555 and CD4017 circuits, 10 red LEDs, trimmer, capacitors, resistors, pin header)

When assembling, start with the smaller components, namely resistors and the ceramic capacitor, and only then install the integrated circuits, electrolytic capacitor, trimmer, and LEDs. Pay attention to the correct orientation of the integrated circuits according to the notch on the package and the printing on the board, and ensure the polarity of the LEDs and electrolytic capacitor. After soldering, check for solder bridges between adjacent pins and remove any excess flux. Only then connect the power supply and test how the LEDs light up sequentially.

The running light kit with NE555 and CD4017 circuits is a classic project where you will learn to solder through-hole components while also understanding the principles of the counter and pulse generator. The series of ten LEDs provides immediate visual feedback, so you will quickly know that the circuit is functioning. The finished board can serve as decoration, a demonstration for an electronics club, or a basis for further experiments. The kit is suitable for beginners, school workshops, and home hobbyists. It is an affordable way to master the basics of soldering on a fun circuit.

Price incl. VAT €4.76