Home page Home page Auto & Moto Car Spare Parts Car body parts Rubber Car Door Window Sealing Strip 20 mm Wide 4 m Roll Self-Adhesive Side Window Edge Protection Black Water and Dust Seal
Rubber Car Door Window Sealing Strip 20 mm Wide 4 m Roll Self-Adhesive Side Window Edge Protection Black Water and Dust Seal

Rubber Car Door Window Sealing Strip 20 mm Wide 4 m Roll Self-Adhesive Side Window Edge Protection Black Water and Dust Seal

Wide 20 mm rubber strip for fitting beneath a car door side window. The 4 m roll has adhesive tape and covers even larger gaps around the glass, protecting it from rain and dirt. Full description
In stock
€20.04
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Rubber Car Door Window Sealing Strip 20 mm Wide 4 m Roll Self-Adhesive Side Window Edge Protection Black Water and Dust Seal

The rubber car door window sealing strip is designed for the gap between the side window and the top edge of the door. The front-facing visible side is 20 mm high, so it covers even a wider gap along the window. The strip is supplied in a 4 m roll and can easily be cut to the required length with scissors. The rear side, which is 15 mm high, has self-adhesive tape, allowing you to attach the strip without drilling or screwing. The seal helps keep water and dust out of the gap around the glass, while giving the edge of the window a neater appearance.

The strip fits into the gap between the glass and the outer edge of the door, where it supplements or covers worn original seals. According to the seller's images, it can be used on both front and rear doors, as well as on a small rear side window. At the pillar between the doors and by the wing mirror, trim the end of the strip to match the shape of the door, as shown in the seller's diagram. The entire strip is made of flexible rubber, which readily follows the curve of the door edge. The black colour blends in with the window frame and other seals on the vehicle.

  • Type – self-adhesive sealing strip for the gap beneath a door side window
  • Front side height – 20 mm
  • Rear adhesive side height – 15 mm
  • Length – 4 m per roll
  • Material – rubber
  • Colour – black
  • Fitting – adhesive tape on the rear side
  • Use – front and rear doors and small rear side windows of passenger cars
  • Package contents – 1 roll of sealing strip, 4 m long

Before applying the strip, clean and degrease the door edge and the area around the glass to ensure the tape adheres well. First, position the strip without removing the backing and measure the required length for each window individually. Trim the ends by the pillar and wing mirror to match the shape of the door, using sharp scissors. Then gradually remove the protective film, fit the strip into the gap and press it down firmly along its entire length. It adheres best to a dry surface at room temperature. When washing the car, simply clean the strip with standard car care products.

The wide rubber strip is a practical solution where there is a larger visible gap between the side window and the door. One 4 m roll is enough for several windows, and any remaining strip can be used later for another repair or on a second vehicle. You can fit it yourself without tools; all you need is scissors for trimming and a clean surface. With its 20 mm high front side, the strip covers gaps that narrower profiles cannot. It is suitable for most passenger cars and helps protect the window edge from moisture and dirt. Once fitted, it gives the door a consistent, tidy appearance.

Price incl. VAT €20.04