Home page Home page Hobbies & Garden Tools Riveting Tools and Equipment Riveting Head M3 to M8 Set of 5 Heads and 80 Rivet Nuts Carbon Steel Hand Riveter for Spanner Ratchet and Drill For Sheet Metal
Riveting Head M3 to M8 Set of 5 Heads and 80 Rivet Nuts Carbon Steel Hand Riveter for Spanner Ratchet and Drill For Sheet Metal

Riveting Head M3 to M8 Set of 5 Heads and 80 Rivet Nuts Carbon Steel Hand Riveter for Spanner Ratchet and Drill For Sheet Metal

Five steel heads from M3 to M8 and eighty nuts for a secure thread in sheet metal or a profile. Rivet using a spanner, ratchet or, more quickly, a cordless drill. Full description
In stock
€22.66
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Riveting Head M3 to M8 Set of 5 Heads and 80 Rivet Nuts Carbon Steel Hand Riveter for Spanner Ratchet and Drill For Sheet Metal

This set of riveting heads with nuts is designed to create a secure thread in sheet metal, a profile or a tube where a standard nut cannot be used. The pack contains 5 heads for M3, M4, M5, M6 and M8 threads and 80 rivet nuts in the corresponding sizes. The heads are made from carbon steel and have a hexagonal body for fitting a spanner. Each head has a threaded mandrel onto which the nut is screwed. The set is suitable for the home workshop, garage and minor repairs.

Using a head is simple: screw the nut onto the mandrel, insert it into a pre-drilled hole and turn the upper part of the head to draw it in. The nut’s knurled shank expands, while its flat flange rests against the surface of the material, preventing the nut from turning in the hole. The heads can be operated with a spanner or ratchet and, according to the seller’s photographs, also with a cordless drill, speeding up work when making a larger number of joints. Once the mandrel has been unscrewed, a thread remains in the material, ready for a screw.

  • Type – set of hand riveting heads with rivet nuts
  • Thread sizes – M3, M4, M5, M6 and M8
  • Head heights – M3 3.3 cm, M4 3.4 cm, M5 4 cm, M6 4.1 cm, M8 4.8 cm
  • Head material – carbon steel
  • Rivet nuts – flat flange and knurled shank
  • Operation – spanner, ratchet or drill
  • Package contents – 5 riveting heads M3 to M8 and 80 rivet nuts (20 pcs M3, 20 pcs M4, 20 pcs M5, 10 pcs M6, 10 pcs M8)

The set is useful for fitting brackets, covers, strips and shelves to sheet-metal structures, modifying trailers, cabinets and bodywork, or working with aluminium and steel profiles. Before riveting, drill a hole to match the outer diameter of the nut and make sure the nut’s flange sits flat against the surface. After use, clean the heads of swarf and occasionally apply a little lubricant to the mandrels so that the nuts can be screwed on and off easily. Store the heads and remaining nuts in a dry place so they are ready for the next job.

This set of five riveting heads and a supply of eighty nuts is a practical choice for anyone wanting to create a secure thread without welding or access to the back of the material. Sizes from M3 to M8 cover most everyday assembly tasks at home or in the workshop. Rivet by hand with a spanner or work more quickly with a drill. Once the supplied nuts have been used, simply buy replacements in the same sizes and continue using the heads. The secure thread in thin sheet metal lets you attach parts even where a standard nut would not hold.

Price incl. VAT €22.66