LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page Auto & Moto Car Electronics Dash Cams Reversing Camera for Lorries and Vans with 4-Pin or RCA Connector Waterproof IP68 Rating 480 TVL Resolution Power Supply 12 to 40 V LED Illumination
Reversing Camera for Lorries and Vans with 4-Pin or RCA Connector Waterproof IP68 Rating 480 TVL Resolution Power Supply 12 to 40 V LED Illumination

Reversing Camera for Lorries and Vans with 4-Pin or RCA Connector Waterproof IP68 Rating 480 TVL Resolution Power Supply 12 to 40 V LED Illumination

Shows you what is happening behind a lorry or van when reversing. Waterproof camera with IP68 rating and 480 TVL resolution operates at 12 to 40 V. Full description
In stock
Delivery €1.59
30-day return policy
Variant:
€44.93
Safe shopping Safe shopping
Overview
Reversing camera for lorries and vans with 4-pin or RCA connector Waterproof IP68 rating 480 TVL resolution Power supply 12 to 40 V LED illumination

The reversing camera is designed for lorries, vans, and other utility vehicles where visibility to the rear when reversing is limited. The camera is mounted on the rear of the vehicle, and the image is displayed on a monitor in the cabin. Thanks to the IP68 rating, it withstands rain, snow, and dust, allowing it to be permanently mounted outside on the bodywork. It operates on 12 to 40 V, making it compatible with both 12V and 24V onboard networks. It connects to the monitor via a 4-pin connector or RCA connectors.

  • Usage — the camera is intended for lorries and vans and is also suitable for other utility vehicles. It aids in reversing and parking in areas where you cannot see directly behind the vehicle through the rear-view mirrors. The camera image will show you obstacles, posts, or pedestrians that are otherwise not visible from the cabin.
  • Waterproof IP68 — an IP68 rating means that the camera is dust-tight and resistant to water even when permanently submerged. Therefore, it can handle rain, snow, dust, and dirt from the road while remaining on the rear of the vehicle.
  • Image — the camera has a horizontal resolution of 480 TVL and uses internal synchronisation. TVL is a unit of resolution for analogue cameras, indicating the number of distinguishable television lines. The image is viewed on a monitor in the cabin, which is not included in the package.
  • LED illumination — around the lens are distributed LED diodes that illuminate the area behind the vehicle. This illumination is particularly useful when reversing in low light or poorly lit areas.
  • Power supply — the camera operates on direct current of 12 to 40 V. You can connect it to vehicles with both 12V and 24V onboard networks, making it suitable for vans and lorries. The power cable is included in the package.
  • Connection — the camera connects to the monitor via a 4-pin connector or RCA connectors. The video output of 1.0 Vp-p at 75 ohms corresponds to a standard analogue video signal. Before purchasing, check what input your monitor has.
  • Installation — the camera is housed in a U-shaped bracket that has holes in the base for mounting. You will position the camera at the rear of the vehicle so that it has a view of the area behind it. When installing, consider routing the cable from the rear of the vehicle to the monitor in the cabin.
  • Package contents — 1x reversing camera, 1x power cable. The monitor and vehicles shown in the photographs are not included in the package.

The reversing camera will help you reverse more safely with a lorry, van, or other utility vehicle. The IP68 rating protects it from water and dust, allowing it to remain permanently mounted on the bodywork. The power supply range of 12 to 40 V allows connection to both 12V and 24V vehicles. The image with a horizontal resolution of 480 TVL is transmitted by the camera using a standard analogue signal to the monitor in the cabin. The package includes the camera and power cable.

Delivery and Returns
Price incl. VAT €44.93