Home page Home page Hobbies & Garden Tools Hand Tools Masonry Tools Replacement Cutting Wheel 22 mm for Manual Tile Cutter Carbide Blade Hole 6 mm Lifespan 8,000 m With Screw For Tiles and Glass
Replacement Cutting Wheel 22 mm for Manual Tile Cutter Carbide Blade Hole 6 mm Lifespan 8,000 m With Screw For Tiles and Glass

Replacement Cutting Wheel 22 mm for Manual Tile Cutter Carbide Blade Hole 6 mm Lifespan 8,000 m With Screw For Tiles and Glass

The carbide wheel with a diameter of 22 mm will return a sharp and clean cut to your manual tile cutter. It comes with an axis screw in a practical plastic box. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Replacement Cutting Wheel 22 mm for Manual Tile Cutter Carbide Blade Hole 6 mm Lifespan 8,000 m With Screw For Tiles and Glass

The replacement cutting wheel is designed for manual tile and ceramic cutters, where the original wheel wears out over time and the cut becomes imprecise. It has an outer diameter of 22 mm and a central hole of 6 mm, so before purchasing, simply verify that your cutter uses a wheel of this size. The blade is made from carbide (tungsten carbide), a very hard material designed for cutting ceramics and glass. The manufacturer states an approximate lifespan of 8,000 metres of cutting for this model. The wheel is supplied in a separate box along with a screw that serves as an axis in the cutting head.

A sharp wheel is the foundation of a clean cut. When the blade dulls, the wheel slips over the glaze, the groove is shallow, and the tile breaks unevenly or chips at the edge when snapped. By replacing it with a new wheel, you restore precision to the cutter without the need to purchase an entirely new machine. A new wheel also reduces waste from damaged tiles, as the groove is sufficiently deep on the first attempt. The model with a lifespan of 8,000 m is suitable for occasional tasks, such as tiling a small bathroom, kitchen countertop, or replacing a few damaged tiles.

  • Type – replacement cutting wheel for manual tile and ceramic cutters
  • Outer Diameter – 22 mm
  • Central Hole – 6 mm
  • Blade Material – carbide (tungsten carbide)
  • Stated Lifespan – 8,000 m of cutting
  • Usage – ceramic tiles, flooring, and glass
  • Contents of Package – 1 cutting wheel and 1 screw (axis) in a plastic box

Replacement is simple: loosen the screw in the wheel holder on the cutting head, remove the worn wheel, and install the new one along with the supplied screw. After tightening, check that the wheel rotates freely and has no lateral play. Before each cut, clean the guide rail and the surface of the tile from dust and debris to ensure the wheel leads a straight groove. Make the groove in one smooth motion with even pressure and do not return along the same path. After use, wipe the wheel dry and store the cutter in a dry place.

This cutting wheel is a practical spare part that will extend the life of your manual tile cutter. With a diameter of 22 mm, hole 6 mm, and a carbide blade, it is an ideal choice for cutting ceramics and glass. Thanks to the screw included in the package, you can perform the replacement immediately after unpacking. The stated lifespan of 8,000 metres will cover a range of smaller tiling tasks in both home and holiday properties. It is also suitable as a spare part for the workshop or in the tool kit, so you have a replacement on hand when the original wheel stops cutting.

Price incl. VAT €12.18