Home page Home page Hobbies & Garden Tools Hand Tools Replacement Blades BS2010 for RB1000 Deburring Handle 10 pcs Silver Swivel Metal Blades for Burrs on Edges and Holes in Metal and Plastic
Replacement Blades BS2010 for RB1000 Deburring Handle 10 pcs Silver Swivel Metal Blades for Burrs on Edges and Holes in Metal and Plastic

Replacement Blades BS2010 for RB1000 Deburring Handle 10 pcs Silver Swivel Metal Blades for Burrs on Edges and Holes in Metal and Plastic

Ten silver BS2010 blades as replacements for the RB1000 deburring tool. Remove burrs from edges, tubes and holes in metal, plastic, PVC, copper and wood. Full description
In stock
€17.42
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Replacement Blades BS2010 for RB1000 Deburring Handle 10 pcs Silver Swivel Metal Blades for Burrs on Edges and Holes in Metal and Plastic

Replacement BS2010 blades are designed for use with the RB1000 hand deburring tool and remove burrs and sharp edges created when cutting, drilling or milling materials. The pack contains 10 identical BS2010 blades, giving you a ready supply so you can replace a worn blade in moments. The silver metal blades have a curved cutting edge that moves smoothly along straight and curved edges, the edges of holes and the ends of tubes. They are suitable for metal, steel, copper, plastic, PVC, resin and wood, and can also be used to finish 3D-printed parts. These blades are designed for the RB1000 handle, where they are held securely while still rotating freely.

Once fitted in the handle, the blade rotates through 360°, allowing it to follow the edge while you guide the tool with a steady stroke. No additional tools are needed for replacement: the RB1000 handle has a quick-release collet at the tip. Slide it back, pull out the worn blade and insert a new one. The curved cutting edge reaches the inner edges of drilled holes, curved edges and places where a file or knife is difficult to use. The BS2010 is practical for finishing sheet metal, metal profiles, plastic pipes and wooden edges. The ten blades take up little room in your tool case, so they are easy to take with you to installation jobs or to the garage.

  • Blade type – BS2010
  • Number of pieces – 10 of the same type
  • Material – metal
  • Colour – silver
  • Rotation in handle – 360°
  • Compatibility – RB1000 deburring handle
  • Suitable materials – metal, steel, copper, plastic, PVC, resin and wood
  • Use – standard and deep holes, intersecting holes, straight and curved edges
  • Package contents – 10x BS2010 blade without handle

When working, guide the blade smoothly along the edge at a slight angle and avoid pressing too hard. For tubes and holes, simply place the cutting edge against the rim and slowly rotate the tool around the entire circumference until the burr is removed. After use, clean the blade of swarf and dust. Store unused blades in a dry place and separately from other tools to prevent them from damaging one another. When a blade no longer cuts cleanly and starts to press down on the edge instead, replace it with a new one from the pack.

A pack of ten silver BS2010 blades is a useful supply for owners of the RB1000 deburring tool who use it in the workshop, on installation jobs or at home. They are useful for locksmiths, plumbers, electricians, model makers and DIY enthusiasts who want to keep a sharp blade close at hand. The blades can be changed in moments using the handle's quick-release collet and help produce clean edges on metal, plastic and PVC parts. With a supply of replacement blades, you will not need to interrupt your work because of a blunt cutting edge. One pack will last a long time, even with regular use.

Price incl. VAT €17.42