Home page Home page Hobbies & Garden Tools Hand Tools Replacement Blade R2 for Manual Edge Trimmer Four-Edged Tungsten Steel Size 1.2 cm Radius of Thicker Edges 1.5 to 2 mm
Replacement Blade R2 for Manual Edge Trimmer Four-Edged Tungsten Steel Size 1.2 cm Radius of Thicker Edges 1.5 to 2 mm

Replacement Blade R2 for Manual Edge Trimmer Four-Edged Tungsten Steel Size 1.2 cm Radius of Thicker Edges 1.5 to 2 mm

Replaceable R2 blade for a more pronounced rounding of thicker ABS and PVC edges of furniture boards. Four cutting edges can be easily rotated after dulling. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Replacement Blade R2 for Manual Edge Trimmer Four-Edged Tungsten Steel Size 1.2 cm Radius of Thicker Edges 1.5 to 2 mm

The Replacement Blade R2 is a replaceable four-edged blade for manual edge trimmers and rounders. With a radius of 2 mm, it creates a more pronounced rounding on the edge of the board, which is clearly visible and pleasant to the touch. The blade is made of tungsten steel, measures 1.2 cm, and has a hole in the centre for the fixing screw. It is designed for thicker edge banding with a thickness of 1.5 to 2 mm. You simply install it in the trimmer head in place of the existing blade.

The R2 blade is not suitable for thin edge bands, as the radius would cut into the material of the board beneath the edge. However, on thicker edges made of ABS or PVC, it creates a regular rounded profile, which is often used for worktops, tables, and kitchen cabinet doors. It features four cutting edges with the same profile, allowing you to simply rotate the blade after one edge becomes dull. Depending on the installation direction, you can work with the trimmer by pushing or pulling towards yourself.

Thicker edge bands with a thickness of 2 mm are often used on worktops and doors that must withstand frequent contact and impacts. In these cases, a larger radius is advantageous, as the rounded edge does not chip as easily and looks better. The R2 blade maintains enough material on the edge, preventing it from cutting through to the board underneath or exposing the adhesive seam. Having it readily available in the workshop allows you to finish thicker edges quickly and without a router.

  • Type – replacement blade for edge banding rounder
  • Radius – R2
  • Number of Cutting Edges – 4
  • Material – tungsten steel
  • Blade Size – 1.2 cm
  • Thickness of Edge Banding – 1.5 to 2 mm
  • Not Suitable For – thin edge bands
  • Compatibility – manual edge trimmer with short and long bodies from the same range
  • Package Contents – 1 Replacement Blade R2

Replacing the blade takes just a moment. Loosen the screw in the trimmer head with an Allen key, remove the original blade, and insert the R2 blade oriented according to the direction of work. Tighten the screw well, position the tool against the edge, and guide it evenly along the entire length. After use, clean the blade of glue and chips to keep it sharp and ready for the next use.

The R2 blade is a practical addition to the manual edge trimmer for anyone working with thicker edge banding. It creates a more pronounced rounded profile on edges with a radius of 2 mm, which looks good on worktops and furniture. The four cutting edges extend the time you can use the blade before it needs replacing. It will be appreciated by carpenters, kitchen installers, and experienced DIY enthusiasts. It is made of tungsten steel and measures 1.2 cm.

Price incl. VAT €12.18