Home page Home page Hobbies & Garden Tools Hand Tools Replacement Blade R2.5 for Manual Edge Trimmer Four-Edged Tungsten Steel 1.2 cm Edge Beveling of Wood and Furniture Boards
Replacement Blade R2.5 for Manual Edge Trimmer Four-Edged Tungsten Steel 1.2 cm Edge Beveling of Wood and Furniture Boards

Replacement Blade R2.5 for Manual Edge Trimmer Four-Edged Tungsten Steel 1.2 cm Edge Beveling of Wood and Furniture Boards

Four-edged blade R2.5 with a large radius of 2.5 mm for pronounced rounding and beveling of board edges and solid wood. Always guide the tool slowly during use. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Replacement Blade R2.5 for Manual Edge Trimmer Four-Edged Tungsten Steel 1.2 cm Edge Beveling of Wood and Furniture Boards

The replacement blade R2.5 is a four-edged blade for manual edge trimmers with a large radius of 2.5 mm. It is primarily designed for beveling the edges of boards and wood, where you want to achieve a pronounced and clearly visible rounding. It is made of tungsten steel, has a square shape measuring 1.2 cm, and features a hole for a fastening screw in the centre. It is suitable for carpentry work on furniture, shelves, and small wooden products. You can install it in the trimmer in place of the existing blade.

The 2.5 mm radius removes a relatively large amount of material in one pass. The cutting angle is more pronounced, so guide the tool slowly and start with light pressure, which you can gradually increase as needed. This way, you will achieve a uniformly rounded edge without torn fibres. The blade has four cutting edges with the same profile, and when one of them becomes dull, simply rotate it. Depending on the installation in the tool head, you work by pushing or pulling.

The R2.5 blade is not intended for thin edge banding strips but for processing the material of the board or solid wood itself. It is also suitable for the edges of planks, battens, and wooden components that you want to round off before sanding and varnishing. The resulting rounding is pronounced, and the edge feels soft and safe, which is particularly appreciated in children's furniture. The large radius also effectively hides small imperfections and splinters created when cutting boards with a saw.

  • Type – replacement blade for manual edge trimmer and beveler
  • Radius – R2.5
  • Number of Cutting Edges – 4
  • Material – tungsten steel
  • Blade Size – 1.2 cm
  • Suitable For – beveling edges of furniture boards and wood
  • Method of Work – slow guiding with gradually increased pressure
  • Compatibility – manual edge trimmer with both short and long bodies from the same range
  • Contents of Package – 1 replacement blade R2.5

Before installation, loosen the screw in the head of the trimmer with an Allen key and remove the original blade. Insert the new blade according to the direction in which you will guide the tool, and tighten the screw firmly. For harder woods, such as oak or beech, it is better to make several lighter passes than one heavy one. After finishing work, remove sawdust and glue residues from the blade and store it in a dry place.

The R2.5 blade transforms the manual edge trimmer into a tool for pronounced rounding of edges, which feels pleasant to the touch and is more resistant to chipping. It is useful in the production of furniture, shelves, wall-mounted shelves, children's toys, cutting boards, and other small products made of solid wood. With a radius of 2.5 mm, it creates a pronounced and even rounding of the edge. After one edge wears out, you can rotate the blade and continue with the next one. It is made of hard tungsten steel and measures 1.2 cm.

Price incl. VAT €12.18