Home page Home page Hobbies & Garden Tools Hand Tools Replacement Blade R1 for Manual Trimmer and Edge Rounder Tipped with Tungsten Steel 1.2 cm Fine Edge Rounding 0.8 to 2 mm
Replacement Blade R1 for Manual Trimmer and Edge Rounder Tipped with Tungsten Steel 1.2 cm Fine Edge Rounding 0.8 to 2 mm

Replacement Blade R1 for Manual Trimmer and Edge Rounder Tipped with Tungsten Steel 1.2 cm Fine Edge Rounding 0.8 to 2 mm

Replaceable four-edged blade R1 for the finest rounding of ABS and PVC edges of furniture boards. Once one edge dulls, simply rotate it and continue working. Full description
In stock
€12.62
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Replacement Blade R1 for Manual Trimmer and Edge Rounder Tipped with Tungsten Steel 1.2 cm Fine Edge Rounding 0.8 to 2 mm

The Replacement Blade R1 is a replaceable blade for the manual trimmer and edge rounder. It creates the finest rounding with a radius of 1 mm, which slightly softens the edge of the board and removes sharp overhangs. The blade is made from tungsten steel and has four cutting edges with the same profile. Its size is 1.2 cm and it has a hole in the centre for a fixing screw. It is used when finishing furniture with edges made of ABS or PVC.

The R1 radius is the same as that of the blade fitted in the trimmer from the factory, making it suitable mainly as a spare or replacement for a worn blade. It is designed for edge banding with a thickness of 0.8 to 2 mm and can handle both thin and thicker strips. The resulting edge is pleasant to the touch while retaining an almost sharp appearance, which is particularly appreciated in modern furniture with clean lines. The blade can be fitted into the tool head in two directions, depending on whether you will be pushing or pulling the trimmer towards you.

The manual trimmer with the R1 blade is particularly popular where you do not want to significantly round the edge but need to remove the sharp overhang after edging. This is typical for cabinet carcasses, side panels, and internal shelves, where the edge should remain as inconspicuous as possible. Having a spare blade in stock is especially worthwhile for larger jobs, where the blade gradually dulls due to glue and the hard plastic of the edges. The replacement is quick, and thanks to it, the tool is ready to work again in no time.

  • Type – replacement four-edged blade for edge banding trimmer
  • Radius – R1
  • Number of Cutting Edges – 4
  • Material – tungsten steel
  • Blade Size – 1.2 cm
  • Thickness of Edge Banding – 0.8 to 2 mm
  • Usage – fine rounding of both thin and thick edge banding
  • Compatibility – manual edge banding trimmer with both short and long bodies from the same range
  • Contents of Package – 1 replacement blade R1

Replacing the blade is simple. Use an Allen key to loosen the screw in the head of the trimmer, remove the worn blade, and fit the new one to match the direction in which you want to guide the tool. After tightening the screw, place the trimmer against the edge and guide it in one smooth motion. After use, clean the blade of glue and shavings and store the tool in a dry place.

The Replacement Blade R1 keeps your edge banding trimmer always ready for work. When one edge dulls, you can rotate the blade, providing you with another, for a total of 4 cutting edges. It is suitable for carpenters, furniture assemblers, and DIY enthusiasts who finish edged boards manually without a router. The fine R1 radius is suitable for edges with a thickness of 0.8 to 2 mm and provides a discreet rounding to the edge. The blade made of tungsten steel has a size of 1.2 cm.

Price incl. VAT €12.62