LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page Home & Household Supplies Lighting Rain Cover for Beam Light with Rotating Head, Base and Display Protection, Transparent with Black Canopy for Outdoor Events
Rain Cover for Beam Light with Rotating Head, Base and Display Protection, Transparent with Black Canopy for Outdoor Events

Rain Cover for Beam Light with Rotating Head, Base and Display Protection, Transparent with Black Canopy for Outdoor Events

The transparent cover protects the base of the beam head with display from rain, allowing the head to rotate freely underneath. It is fitted over the truss beam. Full description
In stock
Delivery €1.59
30-day return policy
€46.68
Safe shopping Safe shopping
Overview
Rain Cover for Beam Light with Rotating Head, Base and Display Protection, Transparent with Black Canopy for Outdoor Events

The rain cover is designed for beam lights and other rotating heads suspended from a truss beam or stand. It protects the base of the light, which houses the control panel with display, buttons, and cable connection points. The top consists of a black canopy draped over the beam, beneath which is a transparent cover that encircles the base on all sides. The head itself hangs below the lower edge of the cover, allowing it to rotate and tilt freely as if there were no cover. This cover is suitable for outdoor concerts, festivals, and corporate or wedding events held in open air. It is also useful in cases where there are multiple rotating heads on the truss, each requiring its own protection.

  • Base Protection – the cover encircles the upper part of the rotating head, where the electronics, display, and connectors are located. This part is particularly vulnerable to rain, as water falls from above and runs down the beam.
  • Free Movement of the Head – the lower edge of the cover ends above the arm of the rotating head. Both the head and arm remain free beneath the cover, allowing programmed movements and effects to operate unchanged. The beam emerges from the lens of the head beneath the cover, so the cover does not obstruct it.
  • Black Canopy – the top part is draped over the beam and covers the light's mounting point. It extends to the sides, allowing water to run off away from the base and down the sides of the cover. The fabric of the canopy lies loosely on the beam and requires no fasteners for attachment.
  • Transparent Cover – the side walls made of transparent material allow visibility of the display and indicators. Address or mode settings can be checked without needing to remove the cover. The transparent cover also does not disrupt the appearance of the light on stage.
  • Bound Edge – the bottom edge of the cover is reinforced with a binding that maintains the shape of the cover and prevents it from adhering to the rotating part of the light. Water drips off the edge to the side away from the head's arm.
  • Cables – power and data cables lead from the base under the canopy to the outside and remain connected. After the event, the cover can be removed, folded flat, and stored with the other equipment. For the next event, it can be fitted just as easily, first placing the canopy over the beam and then the cover around the base.

Package Contents:

  • 1x rain cover for beam light with rotating head

The cover protects that part of the rotating head where the electronics, controls, and connections are located, while allowing the head to operate freely. Thanks to the transparent cover, the display remains visible and checking settings does not require removing the cover. The black canopy covers the mounting on the beam and directs water away to the sides. The cover is fitted without tools and, when folded, takes up little space in the transport box. One cover is used for each rotating head; the light itself and the beam are not included in the package.

Delivery and Returns
Price incl. VAT €46.68