LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Hand Tools Pipe Cutters Pipe Cutter for Diameters 3 to 30 mm with Adjustment Knob and Guide Rollers Size 144 x 63 mm Red for Copper and Stainless Steel Pipes
Pipe Cutter for Diameters 3 to 30 mm with Adjustment Knob and Guide Rollers Size 144 x 63 mm Red for Copper and Stainless Steel Pipes
Pipe Cutter for Diameters 3 to 30 mm with Adjustment Knob and Guide Rollers Size 144 x 63 mm Red for Copper and Stainless Steel Pipes 1
Pipe Cutter for Diameters 3 to 30 mm with Adjustment Knob and Guide Rollers Size 144 x 63 mm Red for Copper and Stainless Steel Pipes 1
Pipe Cutter for Diameters 3 to 30 mm with Adjustment Knob and Guide Rollers Size 144 x 63 mm Red for Copper and Stainless Steel Pipes 2
Pipe Cutter for Diameters 3 to 30 mm with Adjustment Knob and Guide Rollers Size 144 x 63 mm Red for Copper and Stainless Steel Pipes 3

Pipe Cutter for Diameters 3 to 30 mm with Adjustment Knob and Guide Rollers Size 144 x 63 mm Red for Copper and Stainless Steel Pipes

The screw with a knob gradually presses the wheel, ensuring the edge remains perpendicular. It can handle copper, aluminium, and stainless steel from thin tubes up to 30 mm profiles. Full description
In stock
€23.10
Safe shopping Safe shopping
Overview
Pipe Cutter for Diameters 3 to 30 mm with Adjustment Knob and Guide Rollers Size 144 x 63 mm Red for Copper and Stainless Steel Pipes

The pipe cutter divides installation and cooling circuits with a perpendicular cut that does not require additional edge alignment. The working range of 3 to 30 mm covers thin tubes of cooling circuits as well as thicker copper water pipes, with inch markings from 1/8 to 1 1/8 inches embossed on the body for quick reference. The body, measuring 144 x 63 mm, is held in one hand and rotates around the pipe during cutting, eliminating the need to disconnect the pipe. The pressure of the cutting wheel is adjusted using a black knob at the end of the threaded screw, allowing the material to be cut gradually without deforming the wall. The base consists of a durable steel construction that withstands repeated tightening and work with stainless steel. The cutting process occurs without heat, ensuring the pipe around the joint does not heat up.

  • Dimension Range – Pipes from 3 to 30 mm include copper lines, air conditioning cooling circuits, and thin aluminium tubes in machinery. The range is adjusted smoothly by turning the screw, without the need to change jaws or use reducers according to the dimension.
  • Materials – Copper, aluminium, and stainless steel, allowing one tool to serve plumbing, cooling, and minor engineering modifications. For harder materials, the pressure is applied more slowly, while cutting through soft copper is faster and requires fewer turns.
  • Pressure Adjustment – The knurled knob is tightened by hand in small increments, which preserves the wheel and keeps the cut level. Gradual tightening is gentle on thin-walled pipes that could be crushed or cracked with rough handling.
  • Guide Rollers – A pair of rollers keeps the pipe aligned, preventing the cutter from slipping during rotation, and the path returns to the same spot with each turn. The rotation can be guided with one hand, while the other holds the pipe or illuminates the area.
  • Construction – The steel body with a painted finish withstands drops from the workbench and does not flex even under stronger tightening. The painted surface can be wiped clean after use and requires no further maintenance or preservation.
  • Dimensions – 144 x 63 mm, making it suitable for a bag, toolbox, or pocket of work overalls when working on-site. The tool can fit between pipes running side by side in a riser or shaft.

Contents of the package:

  • 1x pipe cutter

This tool is useful for plumbers, refrigeration technicians, and DIY enthusiasts when replacing a tap, reconnecting plumbing in the bathroom, or repairing air conditioning. The cold cut with the wheel produces no sparks or dust from a cutting disc, allowing work in finished interiors without covering furniture. The red design with a black knob is easily visible in a bag, and the tool can be found by touch among keys. The perpendicular edge after cutting allows for the fitting of a coupling or crimp fitting without further alignment with a file. The precision of the cut is particularly evident in crimped joints, where the pipe must fit evenly around the entire circumference. After completing the work, simply wipe the cutter clean of shavings and store it back among other hand tools. It is equally effective in a modelling workshop, during machine servicing, or when modifying garden plumbing.

Price incl. VAT €23.10