Home page Home page Auto & Moto Car Spare Parts Car body parts Pickup Bed Tailgate Seal Length 3 m Profile 28 x 13 mm PVC Self-Adhesive Sealing Strip Black Dust and Water Protection
Pickup Bed Tailgate Seal Length 3 m Profile 28 x 13 mm PVC Self-Adhesive Sealing Strip Black Dust and Water Protection

Pickup Bed Tailgate Seal Length 3 m Profile 28 x 13 mm PVC Self-Adhesive Sealing Strip Black Dust and Water Protection

The self-adhesive strip seals the gap between the tailgate and the pickup bed. It prevents dust, water and small debris from entering the load area. Full description
In stock
€20.48
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Pickup Bed Tailgate Seal Length 3 m Profile 28 x 13 mm PVC Self-Adhesive Sealing Strip Black Dust and Water Protection

The sealing strip is designed to seal the gap between the hinged tailgate and the pickup bed. When driving, dust, water, sand and small stones enter the load area through this gap and can dirty the cargo. The strip is made from flexible PVC and supplied in a single 3 m roll, so it covers the full width of the tailgate on a typical pickup. Its universal shape makes it suitable for most pickups and SUVs with an opening tailgate. You can fit it yourself without drilling or specialist tools.

The strip profile consists of a hollow sealing bulb and a flat base with an adhesive layer. The overall profile dimensions are approximately 28 x 13 mm, allowing the strip to fill even a larger gap between the tailgate and the bed. When the tailgate is closed, the hollow bulb compresses and presses against the opposing surface, creating a continuous barrier along the entire joint. The flat base is fitted with self-adhesive tape covered by a protective film, which you simply peel off before fitting.

  • Purpose – seals the gap between the tailgate and the pickup bed
  • Suitable for – pickups and SUVs with a hinged tailgate
  • Material – PVC
  • Length – 3 m in one roll
  • Profile dimensions – approximately 28 x 13 mm
  • Profile shape – hollow sealing bulb with a flat base
  • Fitting – self-adhesive tape on the underside of the base
  • Length adjustment – the strip can be trimmed with scissors or a knife
  • Colour – black
  • Package contents – 1 roll of sealing strip, 3 m long

Before fitting, measure the length of the joint between the tailgate and the bed, as one roll is 3 m long and wider vehicles may need more than one. Thoroughly clean the surface where you will fit the strip to remove dust, wax and grease, then allow it to dry completely. Ideally, fit the strip in warm, dry weather, when the adhesive bonds best. Gradually peel off the protective film and press the strip firmly along its entire length. Trim any excess at the end with scissors or a sharp knife. After fitting, leave the adhesive to set for several hours before closing the tailgate or loading the bed. Simply wipe the strip occasionally with a damp cloth to prevent dirt from building up.

The self-adhesive tailgate seal is a practical accessory for any pickup owner who carries cargo that needs protection from dust or moisture. The PVC strip, with its hollow sealing bulb, fills the gap between the tailgate and the bed and helps prevent dirt from entering the load area. One roll is 3 m long and can easily be trimmed to the required length. Fitting is quick and requires no modifications to the bodywork, as the strip is held in place by adhesive tape on its underside. It is suitable for work vehicles, off-road vehicles and pickups used for leisure activities.

Price incl. VAT €20.48