Home page Home page Auto & Moto Car Care Products Car Protection & Restoration Paintless Car Body Dent Repair Set Hammer Denting Punch with Interchangeable Tips Plastic Knife and Scraper
Paintless Car Body Dent Repair Set Hammer Denting Punch with Interchangeable Tips Plastic Knife and Scraper

Paintless Car Body Dent Repair Set Hammer Denting Punch with Interchangeable Tips Plastic Knife and Scraper

Hammer down raised areas on car bodywork after pulling out a dent. Punch with interchangeable tips, a hammer and plastic tools for removing adhesive residue. Full description
In stock
€18.73
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Paintless Car Body Dent Repair Set Hammer Denting Punch with Interchangeable Tips Plastic Knife and Scraper

This set is designed for gently flattening car bodywork when repairing dents without repainting. After pulling out a dent using adhesive tabs, a slightly raised area often remains on the panel and needs to be carefully tapped back into level. The denting punch with interchangeable tips is designed for this purpose and is tapped with a hammer. The tips are screwed onto the punch, so they can be changed quickly without any additional tools. The set is suitable as an accessory for a pulling bridge or dent puller that you already own.

The tips come in various shapes – round, flat, cylindrical and tapered with a narrow point. The round and flat tips are suitable for larger raised areas, where the impact needs to be spread over a wider area. The tapered tips with their narrower points help with small protrusions and sharp edges, where careful, precise work is required. The hammer with its long handle makes it possible to deliver light, controlled taps, which is important when working with car body panels.

  • Purpose – flattening raised areas and protrusions on car body panels after pulling out a dent
  • Denting punch – red punch onto which the interchangeable tips are screwed
  • Tips – black screw-on tips in various shapes, from round to tapered
  • Hammer – black head and long handle for light, precise taps
  • Plastic knife – white knife for removing adhesive residue from paintwork
  • Scraper – yellow plastic scraper with a hanging hole
  • Repair method – no repainting or filling required
  • Package contents – 1 hammer, 1 red denting punch, a set of black screw-on tips in various shapes, 1 white plastic knife and 1 yellow plastic scraper

Work slowly and choose several lighter taps rather than one strong blow. Position the tip precisely on the raised area, hold the punch perpendicular to the panel and tap it lightly with the hammer. After every few taps, check the surface against the light or by looking at its reflection to avoid tapping the panel too far in. Melted adhesive residue left after pulling out the tabs can easily be removed from the paintwork with the plastic knife or scraper, which are less likely to scratch it than metal tools. When you have finished, unscrew and wipe the tips, then store them together with the punch so they do not get lost.

This set is a practical accessory for anyone repairing car dents using a paintless method and aiming for a smooth finish. The denting punch with tips in various shapes covers both large raised areas and small, sharp protrusions. The hammer, plastic knife and scraper complete the equipment with tools used in almost every repair. The set will appeal to DIY enthusiasts repairing their own vehicles, as well as home hobbyists who already own a pulling bridge or dent puller. Thanks to its compact size, the entire set fits in a car boot or a tool bag.

Price incl. VAT €18.73