Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Pack of 20 Diamond Drill Bits 6 mm Hex Shank 6.35 mm Length 68 mm Black Dry Drilling into Tiles and Porcelain Tiles
Pack of 20 Diamond Drill Bits 6 mm Hex Shank 6.35 mm Length 68 mm Black Dry Drilling into Tiles and Porcelain Tiles

Pack of 20 Diamond Drill Bits 6 mm Hex Shank 6.35 mm Length 68 mm Black Dry Drilling into Tiles and Porcelain Tiles

Twenty 6 mm diameter bits will see a tiler through a whole series of jobs. The brazed diamond drills ceramic tiles, marble and granite dry and without hammer action. Full description
In stock
€52.36
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Pack of 20 Diamond Drill Bits 6 mm Hex Shank 6.35 mm Length 68 mm Black Dry Drilling into Tiles and Porcelain Tiles

Twenty 6 mm diameter diamond drill bits provide a supply for tradespeople who drill holes in ceramics practically every day. The 6 mm diameter is suitable for the most common wall plugs used for shelf brackets, mirrors and bathroom fittings. All twenty bits have a 6.35 mm hex shank and fit cordless drills as well as impact drivers. The diamond grit is permanently brazed to the tip and removes material by abrasion, dry and without water cooling. Each bit measures 68 mm in length and has a 35 mm working section.

This large pack is a worthwhile choice for building sites and workshops where tools are used up quickly. Rather than buying bits individually, you have a supply to last a long time, so installation work does not stop because of a worn tip. The hollow design removes only a ring of material, leaving the drilled core inside the bit. This keeps the edge of the hole clean and prevents the glaze from chipping, even on hard porcelain tiles. The scale on the body indicates the drilling depth, so you can stop the hole exactly where you need to.

  • Quantity – 20 identical drill bits
  • Diameter – 6 mm
  • Type – hollow core drill bit with brazed diamond
  • Shank – 6.35 mm hex
  • Overall length – 68 mm
  • Working section – 35 mm
  • Material – steel body with diamond segment
  • Drilling method – dry, without water cooling
  • Suitable for – ceramic floor and wall tiles, porcelain tiles, marble and granite
  • Colour – black
  • Pack contents – 20 diamond drill bits, 6 mm diameter

Drill without hammer action and apply light pressure. Start the hole at an angle and straighten the tool once the diamond tip has bitten into the surface. Regularly withdraw the bit slightly while drilling to let dust escape from the hole and prevent the tip from overheating. On smooth glaze, cover the spot with masking tape to stop the tool slipping sideways. Set aside a worn bit and use another one to avoid overloading the drill. After use, tap out the core and return the tool to storage dry. Keep the speed in the lower half of the range, as the diamond grit abrades the material and high speeds only heat the tip.

Twenty bits of the same diameter make this a suitable pack for tilers, installation companies and service technicians working on several jobs in succession. The supply is enough for hundreds of holes for shelves, mirrors, grab rails and pipework, without needing to replenish it during the job. The 6 mm diameter suits the most commonly used wall plug, so one size covers most small fittings around the home. Dry drilling saves time because there is no need to prepare water or clean a wet floor; a vacuum cleaner by the hole is all you need. The bits are also useful as spare tools in a service vehicle, where downtime caused by a missing drill bit is particularly costly. The 35 mm working section is suitable for standard tiles and the layer of adhesive beneath them.

Price incl. VAT €52.36