LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Tools Soldering Irons & Accessories NC-559-ASM Soldering Flux Paste 100 g No Clean Halogen Free Container 6.6 x 7.7 cm Green For PCB Repairs
NC-559-ASM Soldering Flux Paste 100 g No Clean Halogen Free Container 6.6 x 7.7 cm Green For PCB Repairs

NC-559-ASM Soldering Flux Paste 100 g No Clean Halogen Free Container 6.6 x 7.7 cm Green For PCB Repairs

The included syringe with needle dispenses the flux precisely onto the pad or under the BGA. The halogen-free composition does not require any solvent rinsing after soldering. Full description
In stock
€24.41
Safe shopping Safe shopping
Overview
NC-559-ASM Soldering Flux Paste 100 g No Clean Halogen Free Container 6.6 x 7.7 cm Green For PCB Repairs

The NC-559-ASM soldering flux paste is among the most widely used fluxes in electronics service, as it wets pads well and does not spatter when heated. The container contains 100 g of flux, which is sufficient for a large number of repairs when dispensed with a syringe. The composition is halogen-free, so no aggressive residues remain on the board after soldering, which could eventually damage the conductive paths. The flux is no clean, meaning the board does not need to be washed with isopropyl alcohol after repair. The green paste is applied with a syringe and needle directly onto the soldering area.

  • No Clean Composition — residues after soldering do not need to be removed with solvent, which speeds up service work.
  • Dispensing Syringe — the package includes a 5 ml syringe with a metal needle, allowing you to apply the paste precisely between densely populated components.
  • Working with BGA — the flux is suitable for reflowing and replacing BGA packages, where it is necessary to get the paste under the component.
  • PCB Repairs — you will use it for soldering SMD components, connectors, and for removing shorts with solder.
  • Tip Revival — the paste can also be used to clean oxidised soldering tips before re-tinning.
  • Thick Consistency — the paste stays in place when applied and does not run off the board even when tilted.
  • Sealable Container — the screw cap prevents drying out and allows for longer storage of the paste.
  • Package Contents — 1x 100 g soldering flux container, 1x 5 ml syringe with needle

The flux will be useful for service technicians, mobile phone repairers, and DIY enthusiasts who repair electronics themselves. It should be applied to a clean surface, as solder does not adhere to grease or thick layers of oxide, even with flux. The container measures 6.6 x 7.7 cm and fits into a service bag, being wide enough for scooping paste with a spatula or filling a syringe. It is recommended to ventilate the area while working, as the flux releases fumes when heated. After use, close the container and if skin contact occurs, wipe the area with alcohol and rinse with water.

Price incl. VAT €24.41