LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page Hobbies & Garden Gardening Supplies Irrigation Misting Cooling System Set with 4 Nozzles and 3 m Hose Plastic and Brass with 1/2 Inch Internal Thread for Outdoor Cooling
Misting Cooling System Set with 4 Nozzles and 3 m Hose Plastic and Brass with 1/2 Inch Internal Thread for Outdoor Cooling

Misting Cooling System Set with 4 Nozzles and 3 m Hose Plastic and Brass with 1/2 Inch Internal Thread for Outdoor Cooling

The misting nozzles with a 0.3 mm opening create a fine mist that reduces air temperature at a pressure of 2 to 4 bar. Suitable for fans, terraces or parasols. Full description
In stock
Delivery €1.59
30-day return policy
Colour:
€20.92
Safe shopping Safe shopping
Overview
Misting Cooling System Set with 4 Nozzles and 3 m Hose Plastic and Brass with 1/2 Inch Internal Thread for Outdoor Cooling

The misting set is designed to create a fine water mist that reduces the surrounding air temperature by several degrees and increases the feeling of freshness during hot summer weather. The assembly can be mounted on a fan, parasol, pergola, fence or shelter and can be used in the garden, on the terrace, in the greenhouse, and by the pool. The misting nozzles with a 0.3 mm opening and brass fittings create very fine droplets that quickly evaporate surrounding heat without excessively wetting the area or clothing. The set includes 4 nozzles, a 3 m hose, T-connectors, and reducers, allowing for the creation of a short misting circuit around a single location or above a fan. The hose can be shortened if necessary, and the number of nozzles can be adjusted according to the current cooling area and the arrangement of the location.

Main Features:

  • 4 Misting Nozzles – fine mist around the fan, terrace or pergola
  • 3 m Hose – compact distribution for smaller locations
  • Nozzle with 0.3 mm Opening – very fine droplets for effective cooling
  • 1/2 Inch Internal Thread – connection to a standard garden tap
  • Plastic and Brass – combination of materials resistant to corrosion and weather
  • Operating pressure 2 to 4 bar from a standard water supply
  • Easy DIY installation in approximately 10 minutes
  • Saves water and energy compared to traditional watering and air conditioning
  • Reduces surrounding air temperature by several degrees
  • Suitable for fans, parasols, overhangs, pergolas, and fences
  • Can also be used to humidify the air, eliminate odours or reduce insects
  • The assembly can be extended or shortened according to the current area
  • Nozzles can be unscrewed and cleaned if clogged with limescale deposits
  • Also suitable for cooling outdoor areas of restaurants, workshops, and poolside seating
  • The set saves water by tens of percent compared to manual watering or spraying
  • The assembly is suitable for outdoor events, parties, restaurant terraces, or garden seating

Contents: 1x set

Before installation, uncoil the hose and arrange the nozzles according to the area you wish to cool or humidify, and test the layout dry. Connect the nozzles to the hose using the connectors and attach the entire assembly to a garden tap with a 1/2 inch thread or another source of pressurised water. Once the water supply is opened, the nozzles will begin to create a fine mist that evaporates and reduces the surrounding air temperature by several degrees. Maintain the operating pressure between 2 to 4 bar to ensure the mist is even, droplets do not wet the surface under the mist maker, and the nozzles operate stably. At the end of the season, disconnect the assembly, drain any residual water, and store it in a dry place protected from frost to prevent the hoses or connectors from cracking.

Delivery and Returns
Price incl. VAT €20.92