Home page Home page Hobbies & Garden Solar equipment Solar panels Mini Solar Panel 5 V 50 mA 0.25 W 107 x 26 mm Narrow Photovoltaic Cell with Contacts for Soldering Wires for Toy Models and Education
Mini Solar Panel 5 V 50 mA 0.25 W 107 x 26 mm Narrow Photovoltaic Cell with Contacts for Soldering Wires for Toy Models and Education

Mini Solar Panel 5 V 50 mA 0.25 W 107 x 26 mm Narrow Photovoltaic Cell with Contacts for Soldering Wires for Toy Models and Education

Narrow solar cell 107 x 26 mm with a voltage of 5 V and a current of 50 mA. It has plus and minus contacts on the back for easily soldering your own wires. Full description
In stock
€7.82
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Mini Solar Panel 5 V 50 mA 0.25 W 107 x 26 mm Narrow Photovoltaic Cell with Contacts for Soldering Wires for Toy Models and Education

The narrow mini solar panel measuring 107 x 26 mm is a handy power source for places where a standard square cell will not fit. Under full illumination, it delivers a nominal voltage of 5 V and a current of 50 mA. The panel is supplied without a cable and has marked plus and minus contacts on the back to which you can solder wires as needed. The elongated shape is suitable for the ridge of a model house roof, the side of a box, or a narrow strip. It can be used in DIY projects, at school, and in technical clubs.

The peak power of the panel is 0.25 W, which is sufficient for connections with very low consumption, such as for a single LED or a small buzzer. The specified parameters were measured by the manufacturer under simulated light intensity of 38,000 lux. In real operation, the power varies depending on the weather, the angle of the panel, and the cleanliness of its surface, so place it directly in sunlight and out of shade. The flat and lightweight cell adds almost no weight or bulk to the construction.

The panel can serve as a power source for a signal LED, as a drive for a miniature fan, or as a demonstration tool when explaining the conversion of light into electrical energy. By connecting several units in series, you can achieve a higher voltage, while parallel connections will increase the current. The free contacts allow for the selection of thin and flexible wires that can be easily hidden inside the model. Before final assembly, it is recommended to measure the voltage and current with a multimeter directly where the panel will operate, as even partial shading can significantly reduce the output.

  • Type – narrow rectangular mini solar panel
  • Nominal Voltage – 5 V
  • Nominal Current – 50 mA
  • Peak Power – 0.25 W
  • Dimensions – 107 x 26 mm
  • Measurement Conditions – simulated light intensity 38,000 lux
  • Connection – plus and minus contacts on the back for soldering wires
  • Package Contents – 1 solar panel 107 x 26 mm without cable

When soldering, watch the marked polarity and hold the soldering iron tip on the contact only briefly to avoid damage. To charge a battery, include a suitable charging module according to the type of battery. Remove dust from the surface of the cell with a soft dry cloth. The cell is fragile, so do not bend it and secure it flat on a smooth and firm surface.

The narrow solar panel 107 x 26 mm is a practical component for small electronic projects, models, and school experiments. A current of 50 mA is sufficient for LEDs and simple low-consumption circuits. The elongated format fits into slim constructions where a wider panel would be obstructive. The contacts without a cable provide freedom in choosing wires and connectors. It is a good choice for anyone looking to integrate solar power into their model without an unnecessarily large cell.

Price incl. VAT €7.82