Home page Home page Hobbies & Garden Solar equipment Solar panels Mini Solar Panel 5.5 V 160 mA 0.88 W 140 x 45 mm Elongated Photovoltaic Cell with Contacts for Soldering Wires for Models and DIY
Mini Solar Panel 5.5 V 160 mA 0.88 W 140 x 45 mm Elongated Photovoltaic Cell with Contacts for Soldering Wires for Models and DIY

Mini Solar Panel 5.5 V 160 mA 0.88 W 140 x 45 mm Elongated Photovoltaic Cell with Contacts for Soldering Wires for Models and DIY

Elongated solar cell 140 x 45 mm with a voltage of 5.5 V and a power output of 0.88 W. Solder wires to the positive and negative contacts at the centre of its rear side. Full description
In stock
€9.13
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Mini Solar Panel 5.5 V 160 mA 0.88 W 140 x 45 mm Elongated Photovoltaic Cell with Contacts for Soldering Wires for Models and DIY

The elongated mini solar panel with dimensions 140 x 45 mm is a suitable power source for models, toys, and small electronic projects. Under full illumination, it delivers a rated voltage of 5.5 V and a current of 160 mA. The panel is supplied without a cable and has positive and negative contacts in the centre of its rear side, to which you can solder wires of the desired length. The elongated shape fits well on the roof of a model, on the side of a box, or on a longer rail. It can be used at home, in schools, and in electronics clubs.

The peak power of the panel is 0.88 W, which is sufficient for several LEDs, a small motor, or simple low-power circuits. The manufacturer states parameters for a simulated light intensity of 38,000 lux. Actual performance depends on weather conditions, the angle of sunlight, and the cleanliness of the surface, so orient the panel directly towards the sun and protect it from shade. The flat cell with a low profile can be easily integrated into lightweight constructions.

The panel can be used to power garden decorations, drive a small propeller or solar vehicle, build a simple charger with a charging module, and demonstrate the conversion of light into electrical energy. By connecting multiple units in series, you can achieve a higher voltage, and by connecting them in parallel, a higher current. The contacts without a cable allow you to select wires and connectors precisely according to your project. Before permanent installation, verify the voltage and current with a multimeter at the location where the panel will operate, as shading and angle will affect the results.

  • Type – elongated rectangular mini solar panel
  • Rated Voltage – 5.5 V
  • Rated Current – 160 mA
  • Peak Power – 0.88 W
  • Dimensions – 140 x 45 mm
  • Measurement Conditions – simulated light intensity of 38,000 lux
  • Connection – positive and negative contacts in the centre of the rear side for soldering wires
  • Package Contents – 1 solar panel 140 x 45 mm without a cable

When soldering, observe the indicated polarity and apply the soldering iron tip to the contact only for a short time. Use a charging module designed for the specific type of battery to charge the accumulator. Clean the surface of the cell with a soft dry cloth. The cell is fragile, so do not bend it, protect it from falling, and attach it to a flat, solid surface.

The mini solar panel 140 x 45 mm is a practical component for models, small electronics, and education about renewable sources. The voltage of 5.5 V is suitable for a range of simple circuits with diodes and motors. The elongated format makes use of narrow spaces where a square cell would not fit. The free contacts provide full control over the connection. It is an ideal choice for anyone wishing to power their project with sunlight.

Price incl. VAT €9.13