Home page Home page Hobbies & Garden Solar equipment Solar panels Mini Solar Panel 2 V 150 mA 0.3 W 60 x 60 mm Square Photovoltaic Cell Without Cable for Powering Models Toys and DIY
Mini Solar Panel 2 V 150 mA 0.3 W 60 x 60 mm Square Photovoltaic Cell Without Cable for Powering Models Toys and DIY

Mini Solar Panel 2 V 150 mA 0.3 W 60 x 60 mm Square Photovoltaic Cell Without Cable for Powering Models Toys and DIY

Square 60 x 60 mm cell with a voltage of 2 V and a current of up to 150 mA for models and toys. No cable included; solder the wires on at the length you need. Full description
In stock
€8.69
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Mini Solar Panel 2 V 150 mA 0.3 W 60 x 60 mm Square Photovoltaic Cell Without Cable for Powering Models Toys and DIY

This square mini solar panel, measuring 60 x 60 mm, is a compact energy source for toys, models and small electronic projects. In full sunlight, it supplies a rated voltage of 2 V and a current of 150 mA. The panel is supplied without a cable, so you can solder wires to the cell contacts at whatever length your setup requires. Its regular square shape is easy to fit on the roof of a model, on a box lid or on a small stand. It is suitable for DIY enthusiasts, physics teachers and technology clubs.

The panel's peak power is 0.3 W, which is enough for a small motor, several LEDs or simple low-voltage electronics. The actual outdoor output is affected by the weather, the panel's angle to the sun and the cleanliness of its surface, so point it directly towards the light and keep it out of the shade. The flat, low-profile cell is also easy to fit into lightweight structures.

Thanks to its higher current, it can power a small motor with a propeller, supply several LEDs or serve as a power source for a simple solar-powered car. Connecting several units in series provides a higher voltage, while a parallel connection increases the total current. As the cable is not included, you can choose thin, flexible wires and a connector to suit the specific application. Before final installation, measure the voltage and current with a multimeter where the panel will be used, as even partial shade can significantly reduce the output.

  • Type – square mini solar panel
  • Shape – square
  • Rated voltage – 2 V
  • Rated current – 150 mA
  • Peak power – 0.3 W
  • Dimensions – 60 x 60 mm
  • Connection – no cable; wires are soldered to the positive and negative contacts
  • Package contents – 1 solar panel, 60 x 60 mm, without cable

When soldering, check the polarity and touch the contact with the soldering iron tip only briefly to prevent the cell from overheating. If you want to use the panel to charge a rechargeable battery, include a charging module designed for that battery type in the circuit. Remove dust and dirt from the cell surface with a soft, dry cloth. The cell is fragile, so do not bend it, protect it from drops and attach it across its entire surface to a flat, solid base.

The 60 x 60 mm square mini solar panel is a practical component for models, small electronics and teaching about renewable energy sources. Its 2 V voltage is suitable for a range of simple circuits with diodes and motors. Its compact size fits even smaller surfaces, while the square shape gives your project a neat appearance. The cable-free connection gives you full control over the wires and connector. It is a good choice for anyone who wants to power a model and is looking for a small cell for solar power in their own project.

Price incl. VAT €8.69