Home page Home page Hobbies & Garden Creative crafting and DIY kits Airbrushes and accessories Mini HVLP Spray Gun H-2000 Nozzle 0.8 mm Cup 125 ml Gravity Feed Blue for Painting Models Furniture and Car Paint Repairs
Mini HVLP Spray Gun H-2000 Nozzle 0.8 mm Cup 125 ml Gravity Feed Blue for Painting Models Furniture and Car Paint Repairs

Mini HVLP Spray Gun H-2000 Nozzle 0.8 mm Cup 125 ml Gravity Feed Blue for Painting Models Furniture and Car Paint Repairs

Lightweight pneumatic spray gun with a transparent top-mounted cup and three adjustment screws for precise paint application to smaller surfaces, repairs and models. Full description
In stock
€27.03
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Mini HVLP Spray Gun H-2000 Nozzle 0.8 mm Cup 125 ml Gravity Feed Blue for Painting Models Furniture and Car Paint Repairs

The Mini HVLP Spray Gun H-2000 is a compact pneumatic tool for accurately painting smaller surfaces, details and minor repairs. It uses the HVLP principle, delivering a high volume of air at low pressure, which helps reduce overspray and apply paint economically. The spray gun is fitted with a 0.8 mm nozzle and a stainless steel needle and nozzle, which are corrosion-resistant. Paint is gravity-fed from the transparent top-mounted cup, which has a capacity of 125 ml, so you can always see how much paint remains. The spray gun measures approximately 15 x 10 cm and is very lightweight, making it comfortable to use even during longer spraying sessions.

The body of the spray gun has three controls. Use the paint flow regulator to adjust the amount of paint applied, the spray pattern width screw to change the size of the spray pattern, and the valve at the bottom of the handle to adjust the air flow. This allows you to adapt the spray gun to the task at hand, from delicate transitions to an even coat. The recommended working pressure is 3 bar, and the air supply connects via a 1/4-inch inlet thread.

  • Type – HVLP pneumatic spray gun with gravity feed
  • Model – H-2000
  • Nozzle diameter – 0.8 mm
  • Needle and nozzle – stainless steel
  • Cup capacity – 125 ml
  • Cup dimensions – 9 x 6 cm
  • Spray gun dimensions – 15 x 10 cm
  • Working pressure – 3 bar
  • Air inlet – 1/4-inch thread
  • Adjustments – paint flow, spray pattern width and air flow
  • Package contents – spray gun with 0.8 mm nozzle, 125 ml cup, cleaning brush, filter, air connector with EU adapter and instructions

The spray gun is suitable for painting models and wooden products, refinishing furniture, repairing car paintwork, painting smaller areas of walls, decorating ceramics and resin, as well as artistic and creative projects. After each use, clean the spray gun with a suitable thinner and the supplied brush to prevent paint from drying in the nozzle or passages. The nozzle and needle gradually wear with prolonged use, so it is advisable to replace them in time. Wear safety goggles, gloves and a respirator while working, and spray in a well-ventilated area away from naked flames.

The Mini HVLP Spray Gun H-2000 is a practical choice for DIY enthusiasts, model makers and workshops that need precise, economical spraying without bulky, heavy tools. The 0.8 mm nozzle with flow adjustment allows you to work with smaller amounts of paint and focus on detail. The transparent cup makes it easy to monitor paint consumption, while the lightweight body reduces hand fatigue. The three independent adjustments also let you fine-tune the spray to suit the type of paint and the size of the surface being painted. The spray gun has a top-mounted cup with gravity feed, which is easy to fill and clean. Simply connect it to a compressor, set the pressure and start spraying.

Price incl. VAT €27.03