Home page Home page Hobbies & Garden Creative crafting and DIY kits Airbrushes and accessories Mini HVLP Spray Gun H-2000 Nozzle 0.8 mm 125 ml Cup with Pressure Regulator and Pressure Gauge Blue for Painting Models and Cars
Mini HVLP Spray Gun H-2000 Nozzle 0.8 mm 125 ml Cup with Pressure Regulator and Pressure Gauge Blue for Painting Models and Cars

Mini HVLP Spray Gun H-2000 Nozzle 0.8 mm 125 ml Cup with Pressure Regulator and Pressure Gauge Blue for Painting Models and Cars

Set of a pneumatic HVLP spray gun and a pressure regulator with a pressure gauge and filter cup for precise air adjustment when painting smaller areas of cars. Full description
In stock
€51.05
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Mini HVLP Spray Gun H-2000 Nozzle 0.8 mm 125 ml Cup with Pressure Regulator and Pressure Gauge Blue for Painting Models and Cars

The set includes an H-2000 mini HVLP spray gun and an air pressure regulator with a pressure gauge, which connects directly beneath the gun handle. The gun operates with a high volume of air at low pressure, reducing paint overspray and saving material. It is fitted with a 0.8 mm nozzle and needle, both made of stainless steel, and paint is fed by gravity from the transparent 125 ml cup on top. The regulator with a pressure gauge up to 1 MPa allows you to set the pressure directly at the gun and keep it under constant control. Above the regulator is a transparent filter cup, in which the filter element is visible.

You can adjust the paint flow, spray width and airflow on the gun, allowing you to adapt it for fine work or more continuous spraying. The regulator is operated using a brass wheel and has a quick connector at the bottom for attaching the compressor hose. The recommended operating pressure for the gun is 3 bar, and the air inlet has a 1/4-inch thread. The gun itself measures approximately 15 x 10 cm.

  • Type – pneumatic HVLP spray gun with gravity feed and pressure regulator
  • Gun model – H-2000
  • Nozzle diameter – 0.8 mm
  • Needle and nozzle – stainless steel
  • Cup capacity – 125 ml
  • Gun dimensions – 15 x 10 cm
  • Operating pressure – 3 bar
  • Gun air inlet – 1/4-inch thread
  • Pressure gauge – scale up to 1 MPa and 150 psi
  • Regulator – adjustment wheel, transparent filter cup and quick connector
  • Package contents – spray gun with 0.8 mm nozzle, 125 ml cup, pressure regulator with pressure gauge and filter cup, cleaning brush, filter, air connector with EU adapter and instructions

Use the set for painting models, refurbishing furniture, touching up car paint, decorating ceramics and resin, or painting smaller areas. After use, flush the gun with thinner and clean it with the brush to prevent paint from drying in the nozzle. Check the regulator's filter cup regularly, and expect to replace the nozzle and needle after extended use. Wear safety goggles, gloves and a respirator while working, and spray only in a well-ventilated area away from naked flames.

The combination of a mini HVLP gun and pressure regulator is practical for anyone who wants to control the spray directly in their hand. The 0.8 mm nozzle is suitable for precise work with smaller amounts of paint, and the pressure gauge shows the current pressure without requiring you to go over to the compressor. The lightweight gun with a transparent cup does not strain your hand and lets you monitor paint consumption. The gun's three adjustment controls then allow you to fine-tune the amount of paint and spray pattern to suit the object being painted. The gravity-fed 125 ml top cup is easy to fill and just as easy to clean. Simply connect the set to the compressor, adjust the pressure and start painting.

Price incl. VAT €51.05