Home page Home page Hobbies & Garden Creative crafting and DIY kits Airbrushes and accessories Mini HVLP Spray Gun H-2000 1.0 mm Nozzle 125 ml Gravity Feed Cup Pneumatic Blue for Painting Furniture Models and Car Paint
Mini HVLP Spray Gun H-2000 1.0 mm Nozzle 125 ml Gravity Feed Cup Pneumatic Blue for Painting Furniture Models and Car Paint

Mini HVLP Spray Gun H-2000 1.0 mm Nozzle 125 ml Gravity Feed Cup Pneumatic Blue for Painting Furniture Models and Car Paint

Compact pneumatic HVLP spray gun with a transparent top-mounted cup and paint flow and spray pattern adjustments for economical painting of smaller surfaces and car repairs. Full description
In stock
€27.90
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Mini HVLP Spray Gun H-2000 1.0 mm Nozzle 125 ml Gravity Feed Cup Pneumatic Blue for Painting Furniture Models and Car Paint

The H-2000 mini spray gun is designed for painting smaller surfaces, carrying out repairs and working on details, where a large spray gun would be unnecessarily cumbersome. It uses HVLP technology, which works with a high volume of air at low pressure, thereby reducing overspray beyond the painted surface. This version has a 1.0 mm nozzle, with both the needle and nozzle made from corrosion-resistant stainless steel. Paint is gravity-fed from the transparent top-mounted cup, which has a capacity of 125 ml and lets you see at a glance how much paint remains. The spray gun measures approximately 15 x 10 cm and is very lightweight.

Spraying is controlled by three independent controls. The paint flow screw determines how much material the spray gun applies, the spray pattern width adjustment narrows or widens the spray pattern, and the valve on the underside of the handle adjusts the airflow. The working pressure is 3 bar and the air inlet has a 1/4-inch thread, so you can easily connect the spray gun to a compressor.

  • Type – pneumatic HVLP spray gun with top-mounted cup
  • Model – H-2000
  • Nozzle diameter – 1.0 mm
  • Needle and nozzle material – stainless steel
  • Cup – transparent, 125 ml
  • Cup dimensions – 9 x 6 cm
  • Spray gun dimensions – 15 x 10 cm
  • Working pressure – 3 bar
  • Air connection – 1/4-inch thread
  • Adjustments – paint flow, spray pattern width and airflow
  • Package contents – spray gun with 1.0 mm nozzle, 125 ml cup, cleaning brush, filter, air connector with EU adapter and instructions

Use the spray gun for furniture restoration, painting wooden and plastic items, repairing car paintwork, spraying smaller sections of walls, decorating ceramics and resin, or creating models and artworks. After use, rinse it thoroughly with thinner and clean it with the supplied brush to prevent paint from drying in the nozzle. The nozzle and needle will wear over time, so bear in mind that they may need replacing. When spraying, wear safety glasses, gloves and a respirator, work in a well-ventilated area, and always empty and wash the cup after use.

The H-2000 mini spray gun with a 1.0 mm nozzle delivers precise, economical spraying in a compact and lightweight design. It is ideal for a home workshop, garage or model-making bench, where you will appreciate the easy adjustments and good control over the amount of paint. The transparent cup shows how much material is being used, and the spray gun’s small size makes it easy to reach less accessible areas. Adjust the paint flow and spray pattern width to suit the item being painted. The stainless steel needle and nozzle resist corrosion and the common thinners used for cleaning. Connect it to a compressor, set the pressure and get painting.

Price incl. VAT €27.90