LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page PC & Laptop Accessories PC Components CPU coolers and fans M.2 SSD Cooler 7.2 x 2.15 x 0.6 cm for NVMe and NGFF Drives with Thermal Pads and Mounting Kit for PC and PlayStation 5
M.2 SSD Cooler 7.2 x 2.15 x 0.6 cm for NVMe and NGFF Drives with Thermal Pads and Mounting Kit for PC and PlayStation 5

M.2 SSD Cooler 7.2 x 2.15 x 0.6 cm for NVMe and NGFF Drives with Thermal Pads and Mounting Kit for PC and PlayStation 5

Finned cooler for M.2 NVMe and NGFF SSDs in PC and PlayStation 5 console. The package includes 3 thermal pads, screws, and a screwdriver. Full description
In stock
Delivery €1.59
30-day return policy
Colour:
€23.54
Safe shopping Safe shopping
Overview
M.2 SSD Cooler 7.2 x 2.15 x 0.6 cm for NVMe and NGFF Drives with Thermal Pads and Mounting Kit for PC and PlayStation 5

The M.2 SSD cooler is designed to dissipate heat from drives that can overheat during prolonged reading or writing, potentially causing slowdowns. It is suitable for M.2 NVMe and NGFF drives and can be used in both desktop computers and the PlayStation 5 gaming console. The cooler's body is made of aluminium alloy and features a series of longitudinal fins on the top that increase the surface area for heat transfer to the surrounding air. The dimensions of the cooler are 7.2 x 2.15 x 0.6 cm. It attaches to the drive with a bottom metal plate and two pairs of screws.

  • Finned design – the longitudinal fins are interrupted by diagonal notches that facilitate airflow between them. Heat from the controller and memory chips of the drive is transferred to the fins and from there to the air in the case or console.
  • Thermal pads – the package includes three pads with thermal conductivity of 5 W/m.K. They are placed between the drive and the cooler, or between the drive and the bottom plate, filling small irregularities to ensure even heat transfer. They are covered with protective film on both sides, which should be removed before installation.
  • Bottom mounting plate – the metal plate with bent edges holds the drive from underneath. The cooler is screwed to it from the sides, so the drive remains secured between both parts without the need for adhesive.
  • Installation in PC – the assembly with the drive is inserted into the M.2 slot on the motherboard and secured with the original screw of the board. The height of the cooler itself is 0.6 cm, so it is advisable to check the space between the slot and the graphics card beforehand.
  • Use in PlayStation 5 – the cooler is also designed for the M.2 expansion slot in the console, where it dissipates heat from the drive during gaming and downloading games. Before installation, it is advisable to verify that the slot cover in the console can close with the assembly of the drive and cooler.
  • Screwdriver included – the included Phillips screwdriver is used to tighten the four screws, so installation does not require any additional tools.

Package contents:

  • 1x M.2 SSD cooler
  • 1x bottom mounting plate
  • 3x thermal pad
  • 4x screw
  • 1x screwdriver

The cooler for M.2 SSDs is a practical accessory for fast drives that do not have their own cooling in a computer or PlayStation 5 console. Thanks to the aluminium body with fins and thermal pads included in the package, heat from the drive is dissipated into the surrounding air. Installation involves sticking the pad onto the drive, placing the drive onto the bottom plate, attaching the cooler, and tightening the screws. Before purchasing, it is advisable to check that there is enough space above the M.2 slot for the height of the cooler. The complete set with screws and screwdriver allows for installation without additional tools.

Delivery and Returns
Price incl. VAT €23.54